Motorola Moto G Stylus sare parts

Motorola Moto G Stylus Repuestos: Technical Characteristics

The Motorola Moto G Stylus Repuestos are made to perfectly fit the Motorola Moto G Stylus phone. Here are their main technical characteristics:

• Screen: 6.4 inches IPS LCD, Full HD+ Resolution (2300 x 1080 pixels)
• Processor: Qualcomm SDM678 Snapdragon 678
• RAM: 4GB
• Storage: 128GB, expandable via microSD
• Camera: 48MP rear camera, 2MP depth sensor, 16MP selfie
• Battery: 4000 mAh, with 10W fast charge
• OS: Android 10, upgradable to Android 11

Instructions for Replacing Motorola Moto G Stylus Repuestos

Tools Needed:

• Precision Screwdriver
• Suction Cup
• Opening Pick or Plastic Pry Tool
• Tweezers

Steps to Replace Repuestos:

Follow these instructions for a safe replacement of your Motorola Moto G Stylus repuestos.

1. Power off your Motorola Moto G Stylus. 
2. Remove the SIM card tray from the phone. 
3. Use a heat gun or a hair dryer to warm up the edges of the device to loosen the adhesive of the back cover. 
4. Use the suction cup to create an opening gap, insert the pick, and slide it around the phone to cut the adhesive and lift up the back cover. 
5. Remove all the visible screws using the precision screwdriver. 
6. With the help of the pry tool, remove the back frame. 
7. The battery connector, front camera connector, LCD connector and other parts will now be visible. Disconnect them carefully. 
8. Now you can replace the required component with a new one. 
9. After replacing the new parts, reassemble the phone by following the disassembly steps in reverse order. Be sure to replace all screws and secure all connectors.

Note: If you are not comfortable with completing the replacement process yourself, we recommend consulting with an authorized technician or service center.