Motorola Moto G200 5G spare parts

Technical Specifications of Motorola Moto G200 5G

The Motorola Moto G200 5G is a highly advanced mobile phone device, sporting robust features and innovative technology. Below are its detailed technical specifications:

• Display: 6.8 inches, 1080 x 2400 pixels, 20:9 ratio, 387 ppi
• Operating System: Android 11
• Chipset: Qualcomm SM6375 Snapdragon 480+ 5G (8 nm)
• Internal Storage: 128GB, 256GB
• RAM: 4GB, 6GB, 8GB
• Battery: Li-Po 5000 mAh, non-removable, fast charging 33W
• Camera: Triple camera setup - 108 MP, f/1.9, 26mm (wide), 8 MP, f/2.2, 120˚ (ultrawide)

Instructions on Replacing Motorola Moto G200 5G Repuestos

Prior to attempting the replacement process, gather all necessary small mobile repair tools. Below are the step by step instructions:

Step 1: Switch Off the Device

Turn off the Motorola Moto G200 5G and unplug any connected cables or accessories.

Step 2: Remove the Back Cover

Use a suitable tool to carefully pry open the back cover. Start from the edge and work your way around.

Step 3: Disconnect the Battery Connector

Now you will see the internal components. Find the battery connector and disconnect it using a plastic tool.

Step 4: Unscrew the Interior

Depending on the repuesto to be replaced (camera, battery, etc.), you may need to unscrew and remove certain parts. Keep track of all screws and where they fit.

Step 5: Replace the Part

Replace the faulty part with the new one. Be sure to replace careful not to damage other components.

Step 6: Reassemble the Phone

Once the faulty parts have been replaced, reassemble the phone by reversing the steps. Put everything back in its place, screwing parts as necessary and reattach the back cover.

Finally, turn on your Motorola Moto G200 and check if the replaced part is working fine.