Technical characteristics of Motorola Moto G23 Repuestos
The Motorola Moto G23 repuestos are the essential spare parts that can be replaced in case of any damage or functionality issues with the smartphone. They include parts like the display screen, battery, camera, speaker, microphone, and the circuit board.
Display Screen
The G23 features a ...
Technical characteristics of Motorola Moto G23 Repuestos
The Motorola Moto G23 repuestos are the essential spare parts that can be replaced in case of any damage or functionality issues with the smartphone. They include parts like the display screen, battery, camera, speaker, microphone, and the circuit board.
Display Screen
The G23 features a 6.5-inch IPS LCD display with a resolution of 1080 x 2400 pixels.
Battery
The smartphone is powered by a non-removable Li-Po 5000mAh battery.
Camera
The primary camera features a three lens system with 50 MP, f/1.8, (wide), 1/2.0", 0.7µm, PDAFAn 8 MP, f/2.2, 120˚ (ultrawide), 1/4.0", 1.12µmA 2 MP, f/2.4, (macro)Speaker and Microphone
The device features a loudspeaker with 3.5mm jack and supports noise cancellation with a dedicated mic.
Circuit Board
It houses the components and modules facilitating the functionality of the phone. It's key elements include the CPU, GPU and RAM
Instructions for replacing Motorola Moto G23 Repuestos
Steps for Display Screen Replacement :
- Turn off the device and remove the SIM tray.
- Using a heat gun, heat the edges of the screen to weaken the adhesive.
- Gradually pry the screen using a plastic tool without damaging any components.
- Detach the ribbon cable of the screen from the motherboard.
- Prepare the new screen by attaching the adhesive to the borders and connect it to the motherboard.
- Place the new display on the phone and apply gentle pressure to stick it to the body.
- Finally, place it back and turn on the device.
Steps for Battery Replacement :
- Switch off the phone and remove the SIM tray.
- Unscrew and remove the back cover.
- Locate the battery and disconnect it from the motherboard.
- Insert a plastic tool underneath the battery and gently lift it off from the adhesives holding it.
- Place the new battery, connect it and replace the back cover.
- Switch on the device post-replacement.
Note: The replacement of the other parts such as the camera, speaker, microphone and the circuit board follows a similar pattern. Please acquire professional help if unsure to avoid any damage to the phone's components. For camera replacement, care should be taken while removing the camera module from the circuit board. Less