Motorola Moto G24 4G spare parts

Technical Characteristics of Motorola Moto G24 4G Repuestos

The Motorola Moto G24 4G Repuestos, more commonly known as replacement parts, are high-performance equipment that fits perfectly into your Motorola Moto G24 4G mobile phone. To gain an insightful understanding of these parts, here's a simple breakdown of their technical characteristics:

• Display: Moto G24 4G replacement screen is an IPS LCD capacitive touchscreen, 16M colors. Its size is approximately 6.5 inches, and it comes with a resolution of 720 x 1600 pixels.
• Battery: The replacement battery for the Moto G24 4G is Li-Po 5000 mAh, non-removable with a lifespan according to usage and charging habits.
• Camera Lens: The back camera replacement lens offers a resolution of up to 48 MP, aperture f/1.7, PDAF. The selfie camera is also replaceable, offering up to 8 MP, f/2.2.
• Motherboard: The replacement motherboard is equipped with a Qualcomm SM4250 Snapdragon 460 (11 nm) chipset and runs on an Octa-core (4x1.8 GHz Kryo 240 & 4x1.6 GHz Kryo 240) CPU.

Replacement Instructions

Preparation

Before you begin the replacement process, ensure to have a clean and dust-free environment to prevent any damage to the device parts. Also, make sure to ground yourself properly as static electricity could damage the electronic components of the phone. Having the necessary toolkit for mobile repairs at your disposal will also be very beneficial.

Instructions

A specialized guideline for the replacement process of each repuesto is given below:

• Screen:
  1. Switch off the phone and remove the Sim tray.
  2. Heat the edges of the screen gradually to loosen the adhesive.
  3. Using a thin plastic tool, begin to pry open the screen from the sides gently.
  4. Disconnect the flex cables that connect the screen to the motherboard by unscrewing the screws holding them.
  5. Attach the new screen, re-connect the flex cables, screw them back in place, and re-adhere the screen to the phone case.
• Battery:
  1. Following the screen removal process above, locate the battery.
  2. Disconnect the battery connector from the motherboard and remove the screws holding the battery in place.
  3. Carefully remove the battery, avoiding any sharp tools that may puncture it, and replace with a new one.
  4. Re-connect the battery connector, screw it back into place, re-attach the screen and switch on the phone to check if it's working.
• Camera Lens:
  1. Open the phone following the screen removal instructions. Locate the camera lens module and disconnect the flex cable.
  2. Unscrew and remove the old camera lens and replace it with a new one. Connect the flex cable to the new lens and screw back into place.
  3. Re-attach the screen and make sure everything is secured properly.
• Motherboard:
  1. Follow the screen removal and battery disconnection steps first. Locate the screws locking the motherboard in place, unscrew them, and disconnect all the connectors attached to it.
  2. Gently remove the motherboard and replace it with the new one. Reconnect all connectors and screw the new motherboard back into its place.
  3. Re-connect the battery and fasten the screen to the phone case, ensuring that everything is safely secured before switching on the phone.

Remember always to stay calm during the whole process. Any rushed or forced action could further damage the device. Take your time and handle each part with care.