Motorola Moto G50 5G spare parts

    There are 28 products.

    Motorola Moto G50 5G Technical Specifications

    The Motorola Moto G50 5G comes packed with a variety of hardware components. Here's a brief look at its technical specifications.

    • Processor: MediaTek Dimensity 700 5G (7 nm)
    • Display: 6.5 inches Max Vision display, resolution of 720 x 1600 pixels
    • Memory: 4 GB of RAM
    • Storage: 64/128 GB, expandable vi...

    Motorola Moto G50 5G Technical Specifications

    The Motorola Moto G50 5G comes packed with a variety of hardware components. Here's a brief look at its technical specifications.

    • Processor: MediaTek Dimensity 700 5G (7 nm)
    • Display: 6.5 inches Max Vision display, resolution of 720 x 1600 pixels
    • Memory: 4 GB of RAM
    • Storage: 64/128 GB, expandable via microSD
    • Camera: Triple-camera system (48MP + 5MP + 2MP) at the back, 13MP front camera
    • Battery: 5000mAh Battery with 15W TurboPower Charging
    • Operating System: Android 11

    Moto G50 5G Repuesto Replacement Guide

    Even though Motorola Moto G50 is designed with durability in mind, sometimes parts wear out and need replacement. Here is a step by step guide to replace Moto G50 5G repuestos.

    Tools Needed:

    • Screwdriver
    • Plastic opening tool
    • Gloves
    • Eyeglass

    Instructions:

    Please follow these step-by-step instructions to replace the components of your Motorola Moto G50

    Step 1: Power off the mobile

    First, make sure to turn off your Motorola Moto G50 to prevent any electric shock and data loss.

    Step 2: Remove the back cover

    With the help of the plastic opening tool, begin to pry off the back cover starting from the bottom corner.

    Step 3: Remove the screws

    Once the back cover is off, you’ll see several screws holding the internal hardware. Use your screwdriver to remove these screws.

    Step 4: Remove the internal components

    Carefully remove the parts that need replacement. Be sure to remember their placements for reassembly.

    Step 5: Replace the faulty components

    Now replace the faulty components with the new parts. Make sure all the parts are rightly fitted.

    Step 6: Reassemble the phone

    Once all the new parts are in place, it’s time to put your phone back together. Replace the back cover and press until it snaps into place.

    Step 7: Power on your phone

    Power on your phone to test the new components. If everything is done correctly, your phone should be functioning as expected.

    NOTE: Getting inside your smartphone can possibly void the warranty. If you feel uncomfortable with these steps, we strongly recommend you to seek professional help.

    Less
    More
    Showing 1 - 28 of 28 items