Motorola Moto G52 spare parts

Motorola Moto G52 Repuestos - Technical Characteristics

The following section details the technical characteristics of the Motorola Moto G52 repuestos. The handy replacement components are crucial to the longevity of your device.

• The display panel: This is a high-definition (HD) LCD screen replacement component, designed with a resolution of 1080x2400 pixels.
• Battery: Designed to be a high-capacity Lithium-Ion replacement battery. It has a capacity of 5000mAh that lasts all day.
• Back and Front Camera: It's a 48MP back camera module and 13MP camera module at the front respectively, for high-quality images and videos.

Instructions for Replacing Motorola Moto G52 Repuestos

Please switch off the device and remove any SIM or SD cards before starting with the replacement process. Also, make sure you have a set of precision screwdrivers and a plastic pry tool at your disposal.

Screen Replacement

• Step 1: Use a heat gun or a blower to gently warm the edges of the device. This procedure will ease the removal of the broken display.
• Step 2: Use the plastic pry tool to carefully lift the display from the edges.
• Step 3: Disconnect the display cable connector and completely remove the faulty screen.
• Step 4: Attach the replacement screen, ensuring the cable connector is properly inserted, then secure it in place.

Battery Replacement

• Step 1: Once you have removed the display, you will gain access to the internal components of the device. Locate the battery.
• Step 2: Detach the battery connector from the motherboard and remove any screws if any are holding the battery.
• Step 3: Use the plastic pry tool to carefully lift the battery. Be careful not to pierce or distort the battery.
• Step 4: After the faulty battery is out, put the new battery in the original position, connect the connector and secure the screws.

Camera Replacement

• Step 1: If you’ve already removed the screen and the battery, you should be able to locate the camera module.
• Step 2: Carefully remove any screws holding the camera module and disconnect the connector.
• Step 3: Gently remove the camera module and place the replacement camera in the same position.
• Step 4: Reconnect the camera connector and secure it with the respective screws.

Once all these steps are complete, put back the replaced display and switch on the device to ensure everything is functioning as expected.

Please note: While taking on any DIY repair task, be careful and follow the steps exactly as they are, else you could potentially damage your device further. It's always a good practice to seek help from a professional if you aren't confident in your ability to execute the task. Less