Motorola Moto G53 XT2335-2 spare parts

Motorola Moto G53 XT2335-2 Technical Characteristics

The Motorola Moto G53 XT2335-2 is a smartphone with excellent specifications optimised for a fluid user experience. Here, we detail its key technical features:

• Operating System: Android
• Display: 6.8" IPS LCD
• Resolution: 720 x 1560 pixels
• Processor: Qualcomm SDM632 Snapdragon 632
• RAM: 2GB/4GB
• Storage: 32GB/64GB, expandable via microSD
• Camera: 13 MP, f/2.2, (wide), 1.12µm, PDAF
• Battery: 5000 mAh, Li-Po

Replacement Guide for Motorola Moto G53 XT2335-2 Repuestos

Follow these detailed instructions step-by-step to replace faulty parts of your Motorola Moto G53 XT2335-2

Tools Needed

• Screwdriver
• Spudger
• Opening tool or pick
• New replacement parts

Replacement Steps

Before starting, make sure you power off your Motorola Moto G53 XT2335-2.

1. Remove the SIM card tray.
2. Heat the edges of the back cover to soften the adhesive. Then, use an opening tool to carefully pry the back cover away.
3. Remove the screws securing the middle frame. Lift the middle frame and set it aside.
4. Disconnect the battery connector from the motherboard.
5. If replacing a specific part, locate it on the motherboard.
6. Unscrew/disconnect the relevant parts before removing the faulty component.
7. Position the new component in place, carefully replacing screws and reconnecting wires as needed.
8. Reconnect the battery and reassemble the phone by reversing the steps.
9. Double check that each component is correctly in its place and the screws are tightly fixed before powering on the device.

Note: Be extra careful when handling the internal components of the device to avoid causing any further damage.