Motorola Moto G62 5G spare parts

Motorola Moto G62 5G: Technical Characteristics

The Motorola Moto G62 5G model features advanced technologies and high-quality components, ensuring a seamless smartphone experience to users.

• Processor: It hosts a MediaTek MT6833 Dimensity 700 5G (7 nm) processor, providing excellent speed and responsiveness.
• Screen: Equipped with an IPS LCD capacitive touchscreen offering a resolution of 1080 x 2400 pixels, 20:9 ratio (~405 ppi density).
• Memory: It comes with 128GB 4GB RAM, 128GB 6GB RAM variants, ensuring ample space for app, media and file storage.
• Camera: Boasts a 48 MP wide main, 2 MP Macro and 2 MP Depth camera for superior picture quality and a 8 MP wide front camera for selfies.
• Battery: Provides a long-lasting battery experience with a Li-Po 5000 mAh, non-removable battery.

Instructions for Replacing Motorola Moto G62 5G Repuestos

Please note that before proceeding with these instructions, it's crucial to ensure you have the appropriate tools, including a screwdriver set, plastic opening tools, tweezers, and a heat gun.

Step 1: Switch Off the Device

Before starting the repair process, it's imperative to turn off your device to avoid any potential damage to the phone's electronic components.

Step 2: Remove SIM Tray

Start by removing the SIM card tray located on the side of your Motorola Moto G62 5G.

Step 3: Heat the edges of the screen

Using a heat gun, gently heat the edges of the screen. This helps loosen the adhesive holding the screen to the frame.

Step 4: Pry Open the Screen

Insert a plastic opening tool between the screen and the frame, slowly prying it open.

Step 5: Disconnect the Screen

Once opened, locate the connector attaching the screen to the motherboard. Remove it carefully.

Step 6: Replace the Component

Now, replace the old Repuesto with the new one. Set the new Repuesto in place and attach it to the motherboard.

Step 7: Reassemble the Device

After replacing the Repuesto, reassemble your device. Ensure you've safely connected all the cable connectors. Reattach the screen to the frame and press it down to stick it back into place. Finally, put back the SIM tray.

Please note, this is a general guide depending on the required Repuesto the steps may vary. Always refer to model specific instructions when available and consider seeking professional help if unsure.