Motorola Moto g7 spare parts

Motorola Moto g7 Repuestos Features

The Motorola Moto g7 Repuestos has several unique technical characteristics that distinguish it from other models.

• Display: 6.20-inch, with a resolution of 1080x2270 pixels.
• Processor: Qualcomm Snapdragon 632.
• RAM: 4GB.
• Storage: 64GB, expandable via a microSD card.
• Battery Capacity: 3000mAh.
• Operating System: Android 9.0 Pie.
• Camera: Dual rear cameras with 12MP and 5MP sensors, and an 8MP front shooter.

Instructions to Replace Motorola Moto g7 Repuestos

Replacing the parts of a Motorola Moto g7 Repuestos requires patience and precision. Below are the step-by-step instructions:

Required Tools

• Ejector Tool.
• Heat Gun or Hairdryer.
• Plastic opening tools.
• Small Phillips head screwdriver.
• Tweezers.

Removal of Battery

Before beginning, ensure the Motorola Moto G7 is powered off.

• First, remove the sim tray using the Ejector Tool.
• Next, heat the edges of the back cover for 2-3 minutes to soften the adhesive beneath. A heat gun or a hairdryer will suffice.
• Place a suction cup on the back cover and gently lift the back cover. Use a plastic opening tool to pry off the back cover.
• The battery connector is covered with a shield, remove the screws securing the shield then disconnect the battery connector using a plastic tool.
• Lastly, utilize a set of tweezers to carefully lift the battery out of its secure placement.

Replacing the Display

If the display needs replacing, proceed with these steps:

• Once the battery is removed, locate the display's connecting cables attached to the motherboard. Unscrew any screws securing the shield that protects these cables and remove the shield.
• Detach the display cables using a plastic tool.
• Gently heat the front of the display for 2-3 minutes. Using a suction cup and a plastic tool, lift up and remove the broken display panel.
• Replace it with the new panel, reconnect the cables to the motherboard, and reassemble the phone in reverse order.

Remember, always work gently and patiently when disassembling and reassembling your phone to avoid causing further damage.