Motorola Moto G72 spare parts

Motorola Moto G72 Repuestos - Technical Characteristics

The Motorola Moto G72 boasts impressive specifications, making it a smart choice for consumers looking for high-quality smartphones. The key hardware components, or repuestos, of the Motorola Moto G72 can be replaced if any damage occurs. Here we look at the technical details of these components:

• Display: 6.7 inches IPS LCD, 1080 x 2400 pixels, 20:9 ratio (~393 ppi density).
• Processor: Qualcomm SM6150 Snapdragon 675 (11 nm).
• RAM: 6GB.
• Storage: 128GB, expandable via dedicated SD card slot.
• Battery: Non-removable Li-Po 5000 mAh battery.
• Camera: Triple rear camera - 64 MP, f/1.8, (wide), 8 MP, f/2.2, (ultra-wide), 2 MP, f/2.2, (depth).

Instructions for Replacing Motorola Moto G72 Repuestos

Please follow these instructions carefully to replace components of the Motorola Moto G72. Be aware that these steps may void your warranty and are best undertaken by a trained professional.

Preparation

Ensure that all the necessary tools are available before starting. A phone opening tool, precision screwdriver set, plastic spudger, and a clean workstation are recommended.

Step 1: Turn off the Device

Before starting, ensure your Moto G72 is completely powered off to avoid short-circuits.

Step 2: Remove the Back Cover

Use a phone opening tool to gently pry and loosen the back cover. Begin at one corner and work your way around the phone, steadily moving the tool to disengage the clips holding the back cover down.

Step 3: Remove the Battery

Remove the screws securing the battery. Lift the battery slowly as it may be connected to the motherboard with a cable. If there's cable, disconnect it carefully using a plastic spudger.

Step 4: Remove the Desired Component

Access to components such as the motherboard, camera, or screen is now possible. Depending on the component to be replaced, the amounts of disassembling will vary. Therefore, consult the device's repair guide for specific instructions.

Step 5: Replace the Component

Install the new component into the phone. Ensure that it is properly secured and all the connectors are firmly attached.

Step 6: Assemble the Phone

Follow the disassembly steps in reverse order. Carefully reattach the battery, place the back cover, and turn the phone on to ensure proper operation.

Disclaimer: This guide is for informational purposes only. Attempting repairs can be dangerous and may cause damage or void your warranty. Proceed with caution and at your own risk.