Motorola Moto G9 Plus spare parts

Technical Characteristics of Motorola Moto G9 Plus Calidad Premium

The Motorola Moto G9 Plus Calidad Premium boasts of specifications that make it a competitive modern smartphone. Here are the key specifications:

• Operating System: Android 10
• Display: 6.8 inches, 2400 x 1080 pixels, 60Hz refresh rate, HDR10 support
• Processor: Qualcomm Snapdragon 730G
• RAM/Storage: 4GB/128GB, expandable up to 1TB via microSD card
• Battery: 5000mAh, with 30W TurboPower fast charging
• Camera: 64MP (Primary), 8MP (Ultra-Wide), 2MP (Macro), 2MP (Depth), and a 16MP Front Camera
• Additional Features: Side-mounted fingerprint sensor, NFC, Bluetooth 5.0, 4G LTE support

Instructions on how to Replace Motorola Moto G9 Plus Calidad Premium

Follow these steps to replace your Motorola Moto G9 Plus Calidad Premium with utmost caution. Remember, any damage incurred during self-replacement is not covered by the manufacturer's warranty.

Tools Required

• Suction handle
• Spudger
• Precision Tweezers
• Philips Screwdriver
• Opening picks

Steps for Replacement

Before you begin, ensure that your phone is powered off.

1. Firstly, apply a suction handle to the bottom of the Moto G9 Plus. Lift the handle to create an opening. Insert an opening pick into the gap.
2. Move the pick along the edge to cut through the adhesive holding the back cover. Do this all around the device.
3. Carefully remove the back cover using a spudger tool.
4. Unscrew all the visible screws using the correct size Philips head screwdriver.
5. Disconnect the battery connector using the spudger.
6. Remove other cables and connectors attached to the motherboard.
7. Gently lift the motherboard out of the phone.
8. Now, you can replace any parts as needed. To reassemble, follow these steps in reverse order.

Please note: This guide is for informational purposes only. Proceed with the above steps at your own risk and only if you are comfortable with handling sensitive electronic devices.