Motorola Moto G9 Power spare parts

    There are 27 products.

    Technical Characteristics of Motorola Moto G9 Power Repuestos

    The Moto G9 Power Repuestos are essential parts that constitute the Motorola Moto G9 Power smartphone. Their respective key specifications include:

    • Display: 6.8 inches, 1080 x 2400 pixels, IPS LCD display
    • Processor: Qualcomm SM6115 Snapdragon 662 (11 nm)
    • Memory: 64GB 4GB RAM...

    Technical Characteristics of Motorola Moto G9 Power Repuestos

    The Moto G9 Power Repuestos are essential parts that constitute the Motorola Moto G9 Power smartphone. Their respective key specifications include:

    • Display: 6.8 inches, 1080 x 2400 pixels, IPS LCD display
    • Processor: Qualcomm SM6115 Snapdragon 662 (11 nm)
    • Memory: 64GB 4GB RAM, 128GB 4GB RAM
    • Battery: Non-removable Li-Po 6000mAh Battery
    • Camera: 64MP rear camera and 16MP front camera
    • Sensors: Fingerprint (rear-mounted), accelerometer, gyro, proximity

    Instructions for Replacing Motorola Moto G9 Power Repuestos

    Tools Needed:

    • Plastic Opening Tools
    • Phillips #00 Screwdriver
    • Spudger
    • Tweezers

    Step by Step Instructions:

    Before you begin, ensure you turn off your mobile phone to prevent any short circuit during the repair operation.

    Step 1: Using a plastic opening tool, carefully pry and remove the back cover of the device.

    Step 2: With a Phillips #00 screwdriver remove the screws securing the plastic shield covering the internal components.

    Step 3: Use a Spudger to carefully lift the plastic shield and expose the battery connector. Disconnect the battery connector by gently pulling it away from its socket on the motherboard.

    Step 4: Once the battery is disconnected, turn your attention to the Repuestos that need replacement. Depending on the part, this could be circle board, screen, etc., carefully disconnect it from the motherboard and remove.

    Step 5: Replace the faulty part with the new one, ensuring all its connectors align with sockets on the motherboard. Gently push the connectors into their respective sockets.

    Step 6: With the battery still disconnected, replace the plastic shield and secure it in place with the screws you removed earlier using the Phillips #00 screwdriver.

    Step 7: Reconnect the battery connector to its socket on the motherboard, and replace the back cover of the smartphone, ensuring it clicks into place all around the edges.

    Step 8: Switch on your Motorola Moto G9 Power. If it powers up successfully, the replacement was successful.

    Note: Proceed with caution at all times to avoid further damage to the device. If you are not confident about the process, seek the help of a professional. Less
    More
    Showing 1 - 27 of 27 items