Motorola Moto One Action spare parts

    There are 15 products.

    Technical Characteristics of Motorola Moto One Action Repuestos

    The Motorola Moto One Action Repuestos consist of a collection of key components and spare parts that contribute to the overall functioning and performance of the Motorola Moto One Action smartphone. Here are some of the key items included in the repuestos:

    • Screen Display: Thi...

    Technical Characteristics of Motorola Moto One Action Repuestos

    The Motorola Moto One Action Repuestos consist of a collection of key components and spare parts that contribute to the overall functioning and performance of the Motorola Moto One Action smartphone. Here are some of the key items included in the repuestos:

    • Screen Display: This spare features an LTPS IPS LCD, 16M colors, 1080 x 2520 pixels at ~435 ppi density
    • Processor: The primary processor used in Motorola Moto One Action is the Exynos 9609. It's an Octa-core (4x2.2 GHz Cortex-A73 & 4x1.6 GHz Cortex-A53) unit
    • Battery: This component is a Non-removable Li-Po 3500 mAh battery
    • Memory: The replacement memory is a 128GB storage unit, 4GB RAM
    • Camera: The main camera replacement is a high-resolution 12 MP, f/1.8, 1.25µm, PDAF camera

    Replacing Motorola Moto One Action Repuestos: Step-by-Step Guide

    Disclaimer

    Before proceeding, please ensure you have the proper tools and experience for this task. Mistakes can cause more damage to your device. This procedure should be performed by a professional or under professional supervision.

    Instructions for Screen Display Replacement

    1. Turn off your Motorola Moto One Action phone.
    2. Remove the SIM card tray and the MicroSD card if installed.
    3. Use the proper tools to carefully remove the back cover.
    4. Disconnect the battery connector plug from the motherboard.
    5. Remove the protective plate over the LCD connector and disconnect the connector.
    6. Carefully remove the damaged screen.
    7. Replace the screen with a new LCD display unit, reposition the LCD connector, and reassemble the unit in reverse order.

    Instructions for Battery Replacement

    1. Go through steps 1-4 from above to disconnect the battery.
    2. Next, remove the screws securing the battery frame and remove it.
    3. Gently lift the battery out of its compartment. If necessary, use a heat source to softly warm the adhesive securing the battery.
    4. Replace the old battery with a new battery unit and reassemble the unit in reverse order.
    Remember to properly dispose of your old parts as per your local regulations. Less
    More
    Showing 1 - 15 of 15 items