Motorola Moto One Vision spare parts

Motorola Moto One Vision Repuestos Technical Characteristics

The Motorola Moto One Vision is a smartphone from the Motorola franchise. There are a few major components that users may need to replace from time to time. Here are the technical characteristics of some of the key Motorola Moto One Vision repuestos:

• Screen: A 6.3-inch LTPS IPS LCD with a resolution of 1080 x 2520 pixels.
• Battery: A non-removable Li-Po 3500 mAh battery.
• Back Cover: A hard plastic back cover typically available in sapphire or bronze finishes.
• Camera: The main 48 MP rear camera and 25 MP front camera.

Instructions For Replacing Motorola Moto One Vision Repuestos

Screen Replacement

• Turn off the device and remove the SIM card tray.
• Heat the edges of the screen to loosen the adhesive. Be careful to avoid overheating.
• Use a thin, flat tool to gently pry the screen away from the body. Start on one edge and work your way around.
• Disconnect the screen connector from the motherboard.
• Connect the new screen and carefully align it with the body before pressing down to secure it.

Battery Replacement

• Turn off the device and remove the screen following the steps above.
• Disconnect the battery connector from the motherboard.
• Carefully pry the battery from the phone body. It may be lightly glued down.
• Place a new battery in the same location and connect it to the motherboard.

Replacing Back Cover

• Turn off the device and remove the SIM card tray.
• Heat the edges of the back cover to loosen the adhesive.
• Use a thin, flat tool to pry the back cover away from the phone body, starting from one edge and going around.
• Install the new back cover, ensure it is aligned correctly before pressing down to secure it.

Camera Replacement

• Turn off the device and remove the screen and battery following the steps above.
• Locate the camera connector on the motherboard and disconnect it.
• Remove the camera from its housing, then replace it with the new one.
• Connect the new camera to the motherboard.

Please ensure that you have the right tools and replacement parts before you begin. Always handle the components with care to avoid any damage.