Motorola Moto X3 Style X3S XT1570 spare parts

Motorola Moto X3 Style X3S XT1570 Repuestos Technical Specifications

This model is distinguished by the following technical specifics:

• Operating System: Android OS, v5.1.1 (Lollipop), upgradable to v6.0 (Marshmallow).
• Body: Dimensions 153.9 x 76.2 x 11.1 mm (6.06 x 3.00 x 0.44 in).
• Display: IPS LCD, 5.7 inches, 1080 x 1920 pixels.
• Memory: Internal 16GB/32GB/64GB and 3GB RAM with MicroSD slot up to 128GB.
• Battery: Li-Ion 3000 mAh, non-removable battery.
• Camera: 21 MP, f/2.0, PDAF(rear), 5 MP, f/2.0, (front).

Instructions for Replacing Motorola Moto X3 Style X3S XT1570 Repuestos

Step 1: Power off the Phone

Before beginning the repair process, make sure that the phone is completely powered off.

Step 2: Removing the Back Cover

Use a heat gun or a hair drier to loose the adhesive on the edges. Start at the bottom of the phone, gradually moving up along the edges. Be careful not to insert the tool too far inside, as that could damage the internal components.

Step 3: Extract the Battery

Remove the screws that secure the battery in place. Lift the battery connector upwards to disconnect it from the motherboard. Then, carefully lift the battery out of its slot.

Step 4: Remove the Motherboard

Remove the screws securing the motherboard. Carefully remove any connectors and then gently lift the motherboard out of the phone.

Step 5: Reassemble the Phone

Once all defective parts have been replaced, reassemble the phone by reversing the steps. Remember to connect all connectors and screw all parts back securely.

Note: Be sure to use the correct tools and parts for a successful repuestos repair. Reassemble the phone in the opposite order of how it was disassembled. Lastly, test the phone to ensure all components are functioning properly.