Motorola Razr D1 XT918 repuestos

Motorola Razr D1 XT918 Technical Specifications

Motorola Razr D1 XT918 is an Android smartphone with the key specifications detailed as follows:

• Processor: Single-core 1GHz MediaTek MT6575M.
• Display: 3.5 inches, TFT capacitive touchscreen, 320 x 480 pixels resolution.
• Memory: 4GB internal storage, can be expanded up to 32 GB through microSD, 1 GB RAM.
• Camera: 5 Megapixel, LED flash. No front camera.
• Battery: A Non-removable Li-Ion 2000 mAh battery.
• Operating System: Android 4.1 Jelly Bean.

Instructions for Replacment of Motorola Razr D1 XT918 Repuestos

Note: Changing parts of your Motorola Razr D1 XT918 requires some experience with disassembling your device. Proceed with precaution.

Step 1: Switch off the phone

Remember to switch off your Motorola Razr D1 XT918 before starting the replacement process.

Step 2: Remove the battery

Remove the back cover of the phone and carefully take out the battery.

Step 3: Remove the screws

With the battery compartment exposed, you'll find several screws. Unscrew all using a small Phillips head screwdriver.

Step 4: Replacement

Gently lift the back panel of the phone. Now you can replace the desired component:

• Screen: Disconnect the display connector and remove the screen from the front of the phone. Attach the new screen and connect it.
• Camera: Unscrew and disconnect the camera module, then replace it with a new part and reconnect.
• Speaker: Disconnect the speaker module, replace with new part and reconnect.

Step 5: Reassemble the phone

Reposition the back cover of the mobile phone and secure it with the screws removed earlier. Replace the battery and back cover.

Step 6: Switch on the phone

Power on your phone to check if the replaced components work correctly.

Please remember, take care not to force any components during the removal and replacement process as this can permanently damage the smartphone.