Myphone Hammer Blade 2 Pro spare parts

Technical Characteristics of Myphone Hammer Blade 2 Pro Repuestos

The Myphone Hammer Blade 2 Pro is a durable smartphone, built with top-notch technology and resilient functionality. Here are the key technical details of this phone:

• Processor: Octa-core MediaTek Helio P70
• Screen: 5.7 inch IPS display
• Resolution: 1080 x 2160 pixels
• RAM: 6GB
• Internal Storage: 128GB
• Camera: Primary - 24MP, Secondary – 8MP
• Battery: 3950mAh
• OS: Android 9

Replacing Myphone Hammer Blade 2 Pro Repuestos

Here's a step-by-step guide on how to replace parts of the Myphone Hammer Blade 2 Pro:

• Switch off the phone: Before starting the replacement process, it's important to switch off the phone to prevent any electrical short-circuit.
• Remove the back cover: Using a plastic opening tool or your fingernails, if they're strong enough. Pry along the edges of the back cover slowly and lift it away from the phone.
• Unscrew the battery holder: The battery is usually secured with several small screws around its edge. Be careful not to misplace these screws as they're important for securing the replacement battery.
• Disconnect and remove the battery: After unscrewing, carefully disconnect the connector from the motherboard and lift the battery away.
• Replacing the battery: Place the new battery into the battery slot and connect the connector to the motherboard. Secure it by screwing the batter holder back in place.
• Replace the Back Cover: Finally, align the back cover with the body of the phone and press down until it clicks back into place.

Remember, if you're unsure or uncomfortable replacing parts on your own, it's best to hire a professional or visit a certified repair center.