Myphone Hammer Blade 3 spare parts

Technical Characteristics of Myphone Hammer Blade 3 Repuestos

The Myphone Hammer Blade 3 repuestos include several important components of the Myphone Hammer Blade 3. Here are their primary specifications:

• Screen: The display is a 1080 x 2340 pixels, 19.5:9 ratio (~398 PPI density). It is made from Corning Gorilla Glass.
• Battery: The replacement battery for the Myphone Hammer Blade 3 has a capacity of 5000 mAh, offering long use between charges.
• Camera: The camera component includes a dual-camera setup, with a 48MP primary sensor and secondary depth sensor.
• Charging Port: The charging port is a Type-C USB port, compatible with fast charging technology.

Instructions on How to Replace Myphone Hammer Blade 3 Repuestos

Here are the detailed steps on how to replace the parts of your Myphone Hammer Blade 3 repuestos:

Screen Replacement

• Switch off the Hammer Blade 3: Begin by powering off your device to prevent any electrical mishaps.
• Remove the screen: Insert a thin plastic tool between the frame and the screen to gently pry the old screen off.
• Install the new screen: After removing the damaged screen, carefully position the new screen onto the phone and press gently to secure it in place.

Battery Replacement

• Power off the device: Ensure your device is switched off before starting the replacement process.
• Remove the case: Use a small screwdriver to remove the screws holding the back case in place.
• Remove the old battery: Disconnect the battery from the motherboard and gently lift it out of the device.
• Insert the new battery: Position the new battery in the device, connect it to the motherboard and replace the case.

Camera Replacement

• Switch off your phone: Power off your device before starting.
• Remove the back case: Use a small screwdriver to undo the screws securing the back case.
• Disconnect the camera: Disconnect the camera from the motherboard and gently remove it from the device.
• Install new camera: Connect the new camera to the motherboard, secure it in the device, and replace the case.

Charging Port Replacement

• Switch off the phone: Always start by powering off your device.
• Detach the back case: With a small screwdriver, remove the screws securing the back case.
• Remove the old charging port: Carefully disconnect the old charging port from the motherboard.
• Install the new charging port: Connect the new port to the motherboard, ensure it's secured in the device, and reattach the case.