MyPhone Hammer Iron 3 spare parts

Technical Characteristics of MyPhone Hammer Iron 3 Repuestos

The MyPhone Hammer Iron 3 repuestos are replacement parts designed specifically for the MyPhone Hammer Iron 3. Some of the main components include:

• Display Screen: This is a 5.5 inch HD+ IPS display with a resolution of 720 x 1440 pixels.
• Battery: A replaceable Li-Ion 5000 mAh battery powers the device.
• Camera: The device has a dual camera setup on the back, 13 MP + 2 MP, and a 5 MP front camera.
• Memory: The smartphone has 2 GB RAM and 32 GB storage space, extendable up to 128 GB using a MicroSD card.
• Processor: MyPhone Hammer Iron 3 is powered by a Quad-core, 1.3 GHz processor.

Instructions for replacing MyPhone Hammer Iron 3 Repuestos

Tools Required

For this operation, you will need the following tools:

• Small Phillips-head Screwdriver
• Plastic Opening Tools
• Hot Hairdryer or Heat Gun (for some operations)

Replacement Instructions

Before you start, make sure that you have switched off the device and removed the SIM card(s). Start each step with care and attention to prevent any damage.

• Battery Replacement: Remove the back cover using the plastic opening tool. Unscrew the screws holding the battery in place using the screwdriver. Carefully replace the old battery with the new one.
• Display Screen Replacement: Use the hairdryer or heat gun to gently warm up the adhesive holding the screen. Use the plastic opening tool to gently lift the screen off the front case. Proceed with the installation of the new screen.
• Camera Replacement: Find the screws securing the camera unit, unscrew them and gently lift out the camera. Install the new camera, make sure it is correctly connected, and screw it back in place.
• Memory/Processor Replacement: These components are usually soldered onto the motherboard of the device and you need technical expertise to replace them. It is strongly recommended to visit a professional service center for these replacements.