MyPhone Hammer Energy 18X9 repuestos

Technical Specifications of MyPhone Hammer Energy 18X9 Repuestos

The MyPhone Hammer Energy 18X9 Repuestos is a resilient smartphone that features a number of core components that enable its optimum functionality. Here, we detail the technical characteristics of these components.

• Display: IPS capacitive touchscreen, 16M colors, 5.7 inches, 18:9 ratio (~424 ppi density)
• Processor: Mediatek MT6739 (28 nm) Quad-core 1.5 GHz Cortex-A53
• Memory: 32GB 3GB RAM
• Camera: Rear: 13 MP, AF; Front: 5MP
• Operating System: Android 8.1 (Oreo)
• Battery: 5000mAh Li-Po, non-removable

Instructions for replacing MyPhone Hammer Energy 18X9 Repuestos

Before starting, ensure you have the necessary tools: a SIM card eject tool, a plastic opening tool, a small Phillips head screwdriver, and a flat tool (a plastic card can work).

Step 1: Remove the Back Cover

Push the SIM card eject tool into the small hole on the side of the phone. The SIM card and tray should pop out. Once removed, locate and remove the screws on the back of the device.

Step 2: Disconnect the Battery

Use a plastic opening tool to carefully remove the back cover. With the back cover off, the battery connector will be visible. Carefully disconnect this connector.

Step 3: Remove the Faulty Part

• For screen replacement: Remove all screws holding the screen assembly. Disconnect the display connector and replace with the new screen
• For battery replacement: Use the flat tool to gently lift the battery out of its compartment and replace with a new one
• For camera replacement: Disconnect the camera connector. Remove the screw holding the camera in place and replace the camera

Step 4: Reassembly

After the replacement, reconnect the battery connector, replace the back cover, and secure it with the previously removed screws. Insert the SIM card and tray back into the phone. Power on the phone to confirm everything is working properly.