Nokia 2730 spare parts

    There is 1 product.

    Nokia 2730 Repuestos Technical Specifications

    The Nokia 2730 Repuestos is a classic mobile phone with the following technical characteristics:

    • 2G Network: GSM 900 / 1800 / 1900
    • 3G Network: HSDPA 900 / 2100
    • Display: 2.0 inches, TFT, 256K colors
    • Resolution: 240 x 320 pixels
    • Memory: microSDHC (dedicated slot), up to 2 GB, 30 MB intern...

    Nokia 2730 Repuestos Technical Specifications

    The Nokia 2730 Repuestos is a classic mobile phone with the following technical characteristics:

    • 2G Network: GSM 900 / 1800 / 1900
    • 3G Network: HSDPA 900 / 2100
    • Display: 2.0 inches, TFT, 256K colors
    • Resolution: 240 x 320 pixels
    • Memory: microSDHC (dedicated slot), up to 2 GB, 30 MB internal
    • Camera: 2 MP
    • Battery: Removable Li-Ion 1020 mAh battery

    Instructions for Replacing Nokia 2730 Repuestos

    Tools Needed:

    You will need the following tools to replace the parts:

    • Small Phillips Screwdriver
    • Plastic Opening Tools
    • Tweezers

    Steps to Replace Parts:

    To replace the parts of your Nokia 2730, follow the steps below:

    • Turn off the phone and remove the back cover and battery.
    • Use the small Phillips screwdriver to remove the screws securing the front cover.
    • Utilize the plastic opening tools to gently pry open the front cover.
    • This will reveal the inner components. Depending on the part being replaced, the steps may vary from here.
    • If replacing the screen, remove it carefully from its connectors, replace with a new one and reassemble.
    • If replacing the keypad, simply lift it from its position, replace with a new one and reassemble.
    • If replacing the speaker, use the tweezers to disconnect it, replace with a new one and reassemble.
    • Always handle all parts with care to avoid damage to the phone.
    • Once the part has been replaced, reassemble the device by following these steps in reverse order.

    Note: The process may vary slightly depending on the specific part being replaced. However, the general disassembly process will remain the same.

    Less
    More
    Showing 1 - 1 of 1 item