Nokia 3.2 spare parts

Nokia 3.2 Repuestos - Technical Details and Replacement Guide

The Nokia 3.2 smartphone is a reliable and cost-effective digital device, boasting a range of admirable specifications and features. It is an ideal choice for consumers looking for durability and functionality at an affordable price range. This guide offers a comprehensive overview of the primary technical characteristics of Nokia 3.2 repuestos, and step-by-step instructions on how to replace them.

Technical Characteristics of Nokia 3.2 Repuestos

• Screen: Responsive 6.26 inches IPS LCD with a resolution of 720 x 1520 pixels.
• Battery: Non-removable Li-Ion 4000 mAh battery with considerable battery life.
• Camera: Single 13 MP rear camera and 5MP front camera for selfies.
• Processor: Qualcomm SDM429 Snapdragon 429.
• Memory: 2/3GB RAM and 16/32 GB internal storage expandability up to 400GB via microSD.
• Operating System: Android 9.0 (Pie), upgradable to Android 10, Android One.

Instructions to Replace Nokia 3.2 Repuestos

Tools Needed:

• Spudger
• Phillips #001 Screwdriver
• iFixit Opening Tools
• Heat gun
• Tweezers

Steps:

Note: Always ensure the device is turned off and disconnected from any power source before performing any repairs.

• 1. Begin by gently warming the back covers' edges with the heat gun. This loosens the adhesive holding the back cover and the frame together. Use your iFixit opening tool to create a small gap between them, and incrementally pry open the cover.
• 2. With the back cover removed, you would see various screws securing the internal components. Use your Phillips #001 screwdriver to remove all visible screws.
• 3. Gently lift the protective cover with your tweezers, revealing the internal components.
• 4. If you are replacing the battery, locate it and gently disconnect it from the motherboard using your spudger. Lift the battery out and replace it, ensuring the new battery's connection to the motherboard is firm and secure.
• 5. If replacing the screen, disconnect the screen's ribbon cable from the motherboard using your spudger. Lift the broken screen out, and place the new screen, making sure to connect the ribbon cable securely to the motherboard.
• 6. Once all replacements have been made, reassemble the device by reversing the process. Start by replacing the protective cover and screws, then affixing the back cover securely on the device.

Remember to always take your time during a repair process. Rushing could lead to damaging other components, leading to more expensive repairs or replacements. If you encounter any difficulties, consider seeking professional assistance.