Nokia 3710 spare parts
There are 4 products.Nokia 3710 Repuestos Technical Characteristics
The Nokia 3710 repuestos are integral components of the Nokia 3710 phone, designed to maintain optimal performance and extend the device's durability. Here are the key specifications of the Nokia 3710 repuestos:
- Display: Secondary external monochrome display
- Memory: 70 MB, 128 MB RAM, 512 MB RO...
Nokia 3710 Repuestos Technical Characteristics
The Nokia 3710 repuestos are integral components of the Nokia 3710 phone, designed to maintain optimal performance and extend the device's durability. Here are the key specifications of the Nokia 3710 repuestos:
- Display: Secondary external monochrome display
- Memory: 70 MB, 128 MB RAM, 512 MB ROM
- Camera: 3.2 MP, LED flash
- Network: GSM / HSPA
- Battery: Removable Li-Ion 860 mAh battery
- Connectivity: Bluetooth 2.1, A2DP
Instructions on Replacing Nokia 3710 Repuestos
Replacing the parts on your Nokia 3710 requires careful handling to avoid damaging the phone. Follow these steps:
Preparation
- Switch off the phone: Before you begin, switch off your phone to avoid short-circuiting any parts.
- Gather necessary tools: You will need a Philips screwdriver, a plastic opening tool, and of course, the replacement parts.
Disassembly
Proceed with the disassembly process as follows:
- Remove the battery cover: Slide the battery cover away from the top of the phone, then lift it off the phone.
- Remove the battery: Lift off the battery using the plastic opening tool.
- Remove screws: Use your Philips screwdriver to remove the screws visible once the battery is removed.
- Separate the rear case from the rest of the phone: Insert the plastic opening tool in the seam at the bottom of the phone and pry the two halves apart. Be gentle to avoid breaking any parts.
Replace Components
Once the back of the phone is open, you can proceed to replace the faulty components:
- Change faulty parts: Carefully remove the faulty part and replace it with the repuesto. Ensure any connectors are well fixed.
Reassembly
Once you've replaced the faulty parts, follow these steps to put the phone back together:
- Attach the rear case: Align the two halves of the phone and press together until they snap into place.
- Reinsert screws: Use your Philips screwdriver to put the screws back in their place.
- Insert the battery: Place the battery back into its place.
- Replace the battery cover: Slide the battery cover into place until it clicks.
Your Nokia 3710 should now be operating with its fresh repuestos in place.
Less More
Disponible
Disponible
Available
Available