Nokia 8

Nokia 8 Technical Specifications

The Nokia 8 is a smartphone launched by the Finnish company, Nokia. It embodies a compact and sleek design, featuring high-quality hardware and software characteristics. Here are the crucial product specifications:

• Operating System: Android 7.1.1 (Nougat), upgradable to Android 9.0 (Pie)
• Chipset: Qualcomm MSM8998 Snapdragon 835 (10 nm)
• CPU: Octa-core (4x2.5 GHz Kryo & 4x1.8 GHz Kryo)
• Display: 5.3 inches, IPS LCD capacitive touchscreen, 16M colors
• Resolution: 1440 x 2560 pixels, 16:9 ratio (~554 ppi density)
• RAM: 4GB/6GB
• Storage: 64GB/128GB
• Battery: Non-removable Li-Ion 3090 mAh battery

Instructions for Nokia 8 Replacement

Preparation

Before you start replacing your phone, ensure you have a clean, well-lit workspace to avoid losing any small components or screws. Make sure your smartphone is switched off and disconnected from any power source.

Tools Needed

• Small screwdriver
• Plastic opening tools
• Tweezers
• Hot air gun/blower

Step-by-Step Replacement Guide

Note: The process involves handling delicate components. If you are unsure at any point, consider seeking professional help.

Here are the detailed replacement steps:

• Step 1: Removing the Back Cover

  Use the hot air gun to loosen the glue on the edges of the back cover lightly. Carefully insert a plastic tool between the back cover and the frame and gently lift it off. Maintain caution not to damage any internal parts.

• Step 2: Removing the Battery

  Remove the screws securing the battery connector. Disconnect the connector using a plastic tool and lift the battery out using the plastic tool.

• Step 3: Replacing the Component

  If replacing the screen, disconnect the screen connector, remove screws if any, and lift the screen gently away with a plastic tool. If replacing other parts, identify the part, remove any securing bolts or connectors and lift it away softly.

• Step 4: Reassembly

  After replacing the part, reassemble the phone by reversing the steps. Reconnect the battery, secure it with the screws, and then attach the back cover. Make sure all the screws are tightened and the parts aligned correctly.