Nokia 808 spare parts

    There are 8 products.

    Nokia 808 Repuestos Technical Characteristics

    The Nokia 808, also known as the Nokia 808 PureView, is a mobile device recognized for its high-performance features and exceptional camera quality. Here's a rundown of the key technical specifications of Nokia 808 repuestos:

    • Dimensions: 123.9 x 60.2 x 13.9 mm
    • Weight: 169 g
    • Display: AMOLED cap...

    Nokia 808 Repuestos Technical Characteristics

    The Nokia 808, also known as the Nokia 808 PureView, is a mobile device recognized for its high-performance features and exceptional camera quality. Here's a rundown of the key technical specifications of Nokia 808 repuestos:

    • Dimensions: 123.9 x 60.2 x 13.9 mm
    • Weight: 169 g
    • Display: AMOLED capacitive touchscreen, 16M colors
    • Size: 4.0 inches
    • Resolution: 360 x 640 pixels
    • Operating System: Nokia Belle OS
    • CPU: 1.3 GHz ARM 11
    • Internal Storage: 16 GB
    • RAM: 1 GB
    • Battery: Non-removable Li-Ion 1400 mAh battery
    • Camera: 41 MP (38 MP effective) rear camera.

    Instructions for Nokia 808 Repuestos Replacement

    Below are detailed instructions on how to replace some of the key components (repuestos) of the Nokia 808:

    Replacing the Battery

    • Power off the Nokia 808.
    • Locate the battery compartment at the back of the phone.
    • Slide the back cover off.
    • Remove the battery by lifting it up from the slot.
    • Place the new battery into the slot, following the correct orientation.
    • Slide the back cover back into place.

    Replacing the Display Screen

    • Power off the Nokia 808 and remove the battery.
    • Remove the screws from the sides of the phone with a screwdriver.
    • Carefully pry open the front cover of the phone.
    • Gently lift the old screen out of its housing.
    • Install the new screen, ensuring it is seated properly in the housing.
    • Replace the front cover and secure it with the screws.
    • Replace the battery and the back cover.

    Replacing the Camera

    • Switch off the device and remove the battery.
    • Remove the screws on the back cover.
    • Lift the mainboard cover off the device.
    • Disconnect the camera ribbon from the mainboard.
    • Remove the camera module.
    • Place the new camera module and reconnect the camera ribbon.
    • Replace the mainboard cover and secure it with the screws.
    • Replace the battery and the back cover.

    Please follow these instructions carefully to avoid damaging your device.

    Less
    More
    Showing 1 - 8 of 8 items