Nokia 808 spare parts
There are 8 products.Nokia 808 Repuestos Technical Characteristics
The Nokia 808, also known as the Nokia 808 PureView, is a mobile device recognized for its high-performance features and exceptional camera quality. Here's a rundown of the key technical specifications of Nokia 808 repuestos:
- Dimensions: 123.9 x 60.2 x 13.9 mm
- Weight: 169 g
- Display: AMOLED cap...
Nokia 808 Repuestos Technical Characteristics
The Nokia 808, also known as the Nokia 808 PureView, is a mobile device recognized for its high-performance features and exceptional camera quality. Here's a rundown of the key technical specifications of Nokia 808 repuestos:
- Dimensions: 123.9 x 60.2 x 13.9 mm
- Weight: 169 g
- Display: AMOLED capacitive touchscreen, 16M colors
- Size: 4.0 inches
- Resolution: 360 x 640 pixels
- Operating System: Nokia Belle OS
- CPU: 1.3 GHz ARM 11
- Internal Storage: 16 GB
- RAM: 1 GB
- Battery: Non-removable Li-Ion 1400 mAh battery
- Camera: 41 MP (38 MP effective) rear camera.
Instructions for Nokia 808 Repuestos Replacement
Below are detailed instructions on how to replace some of the key components (repuestos) of the Nokia 808:
Replacing the Battery
- Power off the Nokia 808.
- Locate the battery compartment at the back of the phone.
- Slide the back cover off.
- Remove the battery by lifting it up from the slot.
- Place the new battery into the slot, following the correct orientation.
- Slide the back cover back into place.
Replacing the Display Screen
- Power off the Nokia 808 and remove the battery.
- Remove the screws from the sides of the phone with a screwdriver.
- Carefully pry open the front cover of the phone.
- Gently lift the old screen out of its housing.
- Install the new screen, ensuring it is seated properly in the housing.
- Replace the front cover and secure it with the screws.
- Replace the battery and the back cover.
Replacing the Camera
- Switch off the device and remove the battery.
- Remove the screws on the back cover.
- Lift the mainboard cover off the device.
- Disconnect the camera ribbon from the mainboard.
- Remove the camera module.
- Place the new camera module and reconnect the camera ribbon.
- Replace the mainboard cover and secure it with the screws.
- Replace the battery and the back cover.
Please follow these instructions carefully to avoid damaging your device.
Less More
Disponible
Disponible
Out of stock
Out of stock
Out of stock
Disponible
Out of stock
Out of stock