Nokia 8.3 spare parts

Nokia 8.3 Repuestos Technical Characteristics

The Nokia 8.3 is a powerful device that offers a host of features. When it comes to replacing parts or 'repuestos', there are specific technical characteristics to bear in mind.

Nokia 8.3 Display

• Type: IPS LCD capacitive touchscreen, 16M colors
• Size: 6.81 inches, 112.0 cm2 (~82.9% screen-to-body ratio)
• Resolution: 1080 x 2400 pixels, 20:9 ratio (~386 ppi density)

Nokia 8.3 Camera

• Main Camera: 64 MP, f/1.9 (wide), 1/1.72", 0.8µm, PDAF
• Features: Zeiss optics, Dual-LED flash, panorama, HDR

Nokia 8.3 Battery

• Type: Non-removable Li-Po 4500 mAh battery
• Charging: Fast charging 18W

Instructions for Replacing Nokia 8.3 Repuestos

Below are detailed instructions for the replacement of Nokia 8.3 repuestos:

Preparation

• First, make sure to power off your Nokia 8.3.
• Use a SIM tray ejector to remove the SIM card tray.
• Heat up the edges of the phone using a heater/blower. This will loosen the adhesive holding the back panel in place.

Removing the Back Panel

• Use a suction cup tool and pry tool to carefully lift and remove the phone's back panel. Note: Too much force can shatter the glass.

Removing the Battery and Display

• Disconnect the battery connector from the motherboard.
• Use a spudger or plastic tool to pry off the battery. Note: Avoid deforming the battery to avert possible hazards.
• Now, unscrew and remove the protective plates covering the display connectors.
• Disconnect the display connectors from the motherboard and set them aside.

Installation of New Battery and Display

• Connect the new display to the motherboard, making sure to secure the connectors.
• Place the new battery into the phone structure and ensure that it is correctly aligned to connect to the motherboard.
• Secure the battery and display by attaching the protective plates.

Reassembling Your phone

• Reattach the back panel and apply gentle, even pressure until it clips into place.
• Insert the SIM card tray back into the phone.
• Finally, power on your phone to make sure everything is functioning properly.

Note: Always remember safety first when doing these replacements. Be careful to handle battery and device with care.