Nokia Asha 300 spare parts

Nokia Asha 300 Repuestos Technical Characteristics

The Nokia Asha 300 is a feature phone launched by the Nokia Corporation. Below are the technical characteristics of some of the replacement parts:

• Screen: Original Nokia Asha 300 2.4-inch TFT resistive touchscreen, 256K colors, with 240 x 320 pixels resolution.
• Battery: Original Nokia BL-4U 1110 mAh Li-Ion battery, offering up to 550 hours of standby time.
• Keyboard: Alphanumeric keyboard with dedicated music keys.
• Camera: 5MP back camera replacement with QCIF resolution.

Instructions on how to Replace Nokia Asha 300 Repuestos

Replacing the Screen

Follow these steps to replace the screen of your Nokia Asha 300:

• Turn off your phone and remove the back cover and the battery.
• Use a Torx T6 screwdriver to remove the four screws located at the corners of the phone.
• Gently pry open the front cover to reveal the screen.
• Carefully disconnect the screen from the motherboard and replace it with the new one.
• Reassemble the phone in the reverse order of disassembly.

Replacing the Battery

Follow these steps to replace the battery of your Nokia Asha 300:

• Turn off your phone.
• Slide the back cover off, lift the old battery out and replace it with the new one.
• Ensure that the metal contacts on the new battery align with the ones on the phone.
• Replace the back cover.

Replacing the Keyboard

Follow these steps to replace the keyboard of your Nokia Asha 300:

• Remove the back cover, battery, and the four screws at the corners, similar to the screen replacement process.
• Carefully pry open the front cover.
• Remove the screen to reveal the keyboard below.
• Replace the old keyboard with the new one, reassemble the screen and the phone according to the stated steps above.

Replacing the Back Camera

Follow these steps to replace the camera of your Nokia Asha 300:

• Perform the same initial steps as in the keyboard replacement process.
• Upon opening the front cover, locate the camera which is typically connected to the motherboard.
• Gently disconnect it, replace it with the new camera, ensuring the proper connection to the motherboard.
• Reassemble the phone by following the steps in the reverse order.