Nokia Lumia 430 spare parts

    There is 1 product.

    Nokia Lumia 430 Repuestos: Technical Characteristics

    The Nokia Lumia 430 Repuestos has a host of technical features designed to ensure excellent performance. Here are some of its defining characteristics:

    • CPU: Qualcomm MSM8210 Snapdragon 200
    • Screen: 4.0 inch, 480 x 800 pixels, capacitive touchscreen
    • RAM: 1GB
    • Storage: 8GB, expandable ...

    Nokia Lumia 430 Repuestos: Technical Characteristics

    The Nokia Lumia 430 Repuestos has a host of technical features designed to ensure excellent performance. Here are some of its defining characteristics:

    • CPU: Qualcomm MSM8210 Snapdragon 200
    • Screen: 4.0 inch, 480 x 800 pixels, capacitive touchscreen
    • RAM: 1GB
    • Storage: 8GB, expandable up to 128GB via microSD
    • Camera: 2MP primary camera, VGA secondary camera
    • Battery: Li-Ion 1500 mAh battery (BV-5J)

    Instructions to Replace Nokia Lumia 430 Repuestos

    Please follow the steps below to replace the Nokia Lumia 430 repuestos safely and effectively.

    Tools Needed

    • Small Phillips screwdriver
    • Plastic opening tools
    • Tweezers

    Step 1: Remove the Back Cover and Battery

    • Switch off your Nokia Lumia 430 and remove the back cover by prying it open from the small notch at the bottom of the phone.

    • Take out the battery by lifting it up from the bottom end.

    Step 2: Remove the Screws

    • With your Phillips screwdriver, remove the eleven screws securing the internal components.

    Step 3: Remove the Electronics

    • Using the plastic opening tools, carefully lift up the circuit board from its housing. Be gentle to prevent damaging the connectors.

    Step 4: Replace the Necessary Parts

    • With tweezers, remove and replace the necessary parts. This could include the screen, camera, or any other malfunctioning parts.

    Step 5: Reassemble the Phone

    • Once the new parts are in place, gently settle the circuit board back into its housing. Secure it by replacing and tightening the screws.

    • Reinsert the battery, aligning the contacts properly.

    • Finally, snap the back cover back onto the phone.

    Note: Always exercise caution when working with electronic components. Consider seeking professional assistance if you feel unsure about any part of the process.

    Less
    More
    Showing 1 - 1 of 1 item