Nokia X6 spare parts

Nokia X6 Repuestos Characteristics

The repuestos of Nokia X6 consist of many essential parts that are integral to the functioning of the device.

• Display: Nokia X6 repuestos come with a 5.8-inch Full HD display which boasts a resolution of 1080 x 2280 pixels.
• Battery: The device is powered by a non-removable Li-Ion 3060 mAh battery.
• Processor: The device is powered by an Octa-core 1.8 GHz Kryo 260 processor (Qualcomm SDM636 Snapdragon 636).
• Memory: Comes with a possible variation of 64 GB, 4/6 GB RAM or 32 GB, 4 GB RAM.
• Camera: The Nokia X6 repuestos include dual: 16 MP (f/2.0) + 5 MP (f/2.2) back camera and a 16 MP (f/2.0) front camera.

Instructions for Replacing Nokia X6 Repuestos

Ensure you have the necessary tools handy before you start the replacement process. You would need a SIM Card Ejector, a plastic opening tool, tweezers, Phillips Screwdriver and a New repuestos part for your Nokia X6.

Step 1: Power Off the Device

Start by switching off your device to prevent any possible short-circuits during the replacement process.

Step 2: Remove the SIM Tray

Use the SIM card ejector to remove the SIM card tray from the device.

Step 3: Remove the Back Cover

Use the plastic opening tool to pry open the back cover of your device. Start by inserting the plastic opening tool into the seam of the back cover and work your way around the sides.

Step 4: Remove the Battery Connector

Use the tweezers to unplug the battery connector from the motherboard of your device. This will disconnect the power supply, making it safe to continue with the replacement process.

Step 5: Replace the Repuestos Part

Now, remove the screws that are holding the part you wish to replace. Use the tweezers to take out the part and put in the new one. Replace the screws to secure the new part properly.

Step 6: Reassemble the Device

After replacing the repuestos, follow the above steps in reverse order to reassemble your device. Power on the device after reassembly is complete.