Nomu S10 pro spare parts

Nomu S10 Pro Technical Specifications

The NOMU S10 Pro is an Android smartphone which was released in October 2017.

• Display: IPS 5.0 inches, 1280 x 720 pixels, Gorilla Glass 3
• Processor: MediaTek MT6737T quad-core 1.5 GHz
• RAM: 3 GB
• Storage: 32 GB, expandable up to 64 GB
• Camera: Rear 8.0 MP, Front 2.0 MP
• Battery: 5000mAh, non-removable
• OS: Android 7.0
• Other features: IP69 water and dust resistance, drop-proof construction

How to Replace Parts on Nomu S10 Pro

Please note that you take full responsibility for your device and these instructions are for guidance only.

Tools Required

• Screwdrivers: small Phillips and flat-head
• Plastic prying tools
• Heat gun or hair dryer

Steps to Replace parts:

• Power off the device.
• Remove the back cover by unscrewing the screws located at the corners of the device using a Phillips screwdriver.
• Use the plastic prying tool to gently remove the back cover.
• Remove the battery connectors from the mainboard using the plastic prying tool.
• Remove the screws holding the metal shield over the motherboard using the Phillips screwdriver.
• Locate the part that needs to be replaced and gently remove it.
• Install the new part.
• Reassemble the device by following the steps in reverse order.

Every smartphone repair should be performed with a lot of caution. If you are uncertain or do not feel comfortable performing the repair, we recommend you consult a professional or service center.