Oneplus 10T spare parts

Technical Characteristics of Oneplus 10T Repuestos

The Oneplus 10T is equipped with high-quality components designed to offer a seamless and robust user experience. Below are the primary repuestos (replacement parts) for the Oneplus 10T:

1. Display Screen

Size: 6.7 inches
Resolution: 2400 x 1080 pixels
Type: AMOLED
Protection: Corning Gorilla Glass

2. Battery

Capacity: 4800mAh
Type: Lithium-ion, non-removable
Fast Charging: Yes, 150W charging capability

3. Camera Modules

Rear Camera: Triple - 50MP (main) + 8MP (ultrawide) + 2MP (macro)
Front Camera: 16MP

4. Motherboard

Processor: Qualcomm Snapdragon 8+ Gen 1
RAM: 8GB/12GB/16GB
Storage: 128GB/256GB

5. Charging Port

Type: USB Type-C
Features: Fast Charging, Data Transfer

Instructions on How to Replace Oneplus 10T Repuestos

Tools Required

• Plastic Pry Tools
• Suction Cup
• Phillips Head Screwdriver
• SIM Ejector Tool
• Tweezers
• Heat Gun
• Anti-static Wrist Strap

Step-by-Step Replacement Guide

1. Preparation

• Power off the Oneplus 10T.
• Remove the SIM card tray using the SIM Ejector Tool.
• Wear an anti-static wrist strap to avoid damage to the internal components.

2. Removing the Back Cover

• Apply heat to the edges of the back cover using a heat gun to soften the adhesive.
• Use a suction cup to create a gap between the back cover and the frame.
• Insert a plastic pry tool into the gap and carefully slide it around the edges to release the adhesive.
• Lift the back cover off the phone once the adhesive is loosened.

3. Disconnecting the Battery

• Locate the battery connector, usually covered with a shield.
• Remove the screws securing the shield with a Phillips head screwdriver.
• Using tweezers, carefully detach the battery connector from the motherboard.

4. Replacing the Display Screen

• Disconnect all ribbon cables connecting the display to the motherboard.
• Gently push out the old display from the front using a plastic pry tool.
• Align the new display and reconnect all ribbon cables.
• Test the new display by powering on the phone before reassembling.

5. Replacing the Battery

• Lift the old battery using a plastic pry tool without causing damage to the surrounding components.
• Insert the new battery and connect it to the motherboard.
• Secure the battery connector with the previously removed shield and screws.

6. Reassembling the Phone

• Reattach the back cover using new adhesive if necessary.
• Press the back cover firmly to ensure it sticks properly.
• Insert the SIM card tray back into its slot.
• Power on the Oneplus 10T to verify all functions are working correctly.

Follow these instructions carefully to ensure a successful replacement of Oneplus 10T repuestos. If you are unsure about any step, it is advisable to seek professional assistance.