Oneplus 11 5G spare parts

Technical Characteristics of OnePlus 11 5G Repuestos

The OnePlus 11 5G is a high-end smartphone that offers a variety of advanced features. Below are the primary technical characteristics of the OnePlus 11 5G components (repuestos):

• Display: 6.7 inches, Fluid AMOLED, 120Hz refresh rate
• Resolution: 3216 x 1440 pixels (QHD+)
• Processor: Qualcomm Snapdragon 8 Gen 2
• RAM: 12GB/16GB (LPDDR5X)
• Internal Storage: 256GB/512GB (UFS 3.1)
• Camera: Triple cameras (primary: 50MP, ultra-wide: 48MP, telephoto: 32MP)
• Battery: 5000mAh, supports fast charging
• Operating System: OxygenOS based on Android 13
• Connectivity: 5G, Wi-Fi 6, Bluetooth 5.2, USB Type-C
• Other features: In-display fingerprint sensor, stereo speakers, Dolby Atmos

Instructions for Replacing OnePlus 11 5G Repuestos

1. Preparation

Before you begin, ensure you have the necessary tools and parts:

• Pentalobe and Phillips screwdrivers
• Plastic opening tools
• Suction cup
• Replacement parts (e.g., screen, battery)
• Adhesive strips
• Anti-static wrist strap

2. Power Off the Device

Completely power off your OnePlus 11 5G to prevent any electrical damage or shorting.

3. Remove SIM Card Tray

Using a SIM ejection tool, remove the SIM card tray from the side of the device.

4. Heat the Edges

Gently heat the edges of the phone with a heat gun or hair dryer to soften the adhesive.

5. Open the Back Cover

Use a suction cup to gently lift the back cover. Insert a plastic opening tool and carefully slide it around the edges to release the adhesive. Be cautious to avoid damaging internal components.

6. Disconnect Battery

Locate the battery connector and carefully disconnect it using a plastic tool. Allow the device to fully discharge before proceeding.

7. Remove Screws and Brackets

Unscrew any remaining screws and carefully remove the brackets securing the internal components. Keep the screws organized for reassembly.

8. Replace the Damaged Component

Carefully remove the damaged component you wish to replace (e.g., screen, battery) and swap it with the replacement part. For the screen, disconnect the display connectors first. For the battery, gently pry it out using a plastic tool.

9. Reassemble the Device

Once the new part is in place, reattach any screws, brackets, and connectors. Ensure all components are securely connected and properly aligned.

10. Seal the Device

Apply new adhesive strips around the edges of the back cover. Align the back cover and press it firmly into place. Reinsert the SIM card tray.

11. Power On and Test

Power on the OnePlus 11 5G and test the replaced component to ensure it is functioning correctly.