Oneplus 3T spare parts

OnePlus 3T Replacement Parts (Repuestos) Technical Characteristics

Replacing parts of the OnePlus 3T can significantly extend its lifespan and restore optimal functionality. Below are the common replacement parts (repuestos) and their technical characteristics:

1. Screen Assembly

• Type: Optic AMOLED capacitive touchscreen, 16M colors
• Size: 5.5 inches
• Resolution: 1080 x 1920 pixels (~401 ppi pixel density)
• Protection: Corning Gorilla Glass 4

2. Battery

• Type: Non-removable Li-Ion 3400 mAh battery
• Compatibility: OnePlus 3T

3. Rear Camera Module

• Camera: 16 MP, f/2.0, phase detection autofocus, OIS, LED flash
• Video: 2160p@30fps, 720p@120fps, Auto HDR, panorama

4. Front Camera Module

• Camera: 16 MP, f/2.0, 1.0 µm pixel size
• Features: Auto HDR

5. Charging Port Assembly

• Type: USB Type-C 1.0 reversible connector
• Features: Supports Dash Charge (5V 4A)

Instructions to Replace OnePlus 3T Parts

Ensure that your OnePlus 3T device is powered off before initiating any replacement process. Work in a clean, dry, and well-lit environment to avoid damage to the components.

1. Replacing the Screen Assembly

• Step 1: Use a SIM ejector tool to remove the SIM card tray.
• Step 2: Remove the back cover by unscrewing the two screws located at the bottom near the charging port.
• Step 3: Carefully use a plastic prying tool to detach the back cover from the front assembly. Be cautious of the fingerprint sensor cable attached to the back cover.
• Step 4: Disconnect the fingerprint sensor cable and the battery connector.
• Step 5: Unscrew the screws holding the screen assembly and carefully remove it.
• Step 6: Replace with the new screen assembly and reconnect all the necessary connectors.
• Step 7: Reassemble the device by reversing the steps.

2. Replacing the Battery

• Step 1: Follow steps 1 to 4 from the screen assembly replacement to open the device.
• Step 2: Locate the battery connector and disconnect it.
• Step 3: Carefully pry out the battery using a plastic tool. Do not use metal tools to avoid puncturing the battery.
• Step 4: Place the new battery in the compartment and ensure a snug fit.
• Step 5: Reconnect the battery connector and any other disconnected components.
• Step 6: Reassemble the device by reversing the opening steps.

3. Replacing the Rear Camera Module

• Step 1: Follow steps 1 to 4 from the screen assembly replacement to open the device.
• Step 2: Locate the rear camera module and disconnect the camera cable from the motherboard.
• Step 3: Remove the camera module by gently prying it out.
• Step 4: Install the new camera module and ensure it is well-connected to the motherboard.
• Step 5: Reassemble the device by reversing the opening steps.

4. Replacing the Front Camera Module

• Step 1: Follow steps 1 to 4 from the screen assembly replacement to open the device.
• Step 2: Locate the front camera module connected to the front assembly.
• Step 3: Disconnect the front camera cable from the motherboard.
• Step 4: Gently remove the front camera module.
• Step 5: Install the new front camera module and reconnect to the motherboard.
• Step 6: Reassemble the device by reversing the opening steps.

5. Replacing the Charging Port Assembly

• Step 1: Follow steps 1 to 4 from the screen assembly replacement to open the device.
• Step 2: Locate the charging port assembly at the bottom of the device.
• Step 3: Disconnect the charging port cable from the motherboard.
• Step 4: Unscrew and remove the charging port assembly.
• Step 5: Install the new charging port assembly and ensure all connectors are properly seated.
• Step 6: Reassemble the device by reversing the opening steps.

These detailed instructions should help you perform successful replacements on your OnePlus 3T. Always handle components with care to avoid damage during the repair process.