Oneplus 6 spare parts

Technical Characteristics of OnePlus 6 Replacement Parts

The OnePlus 6 is a powerful smartphone known for its high performance and sleek design. When it comes to replacement parts (repuestos) for the OnePlus 6, here are some key technical characteristics:

• Screen: 6.28-inch Optic AMOLED display, with a resolution of 1080 x 2280 pixels.
• Battery: Li-Po 3300 mAh, non-removable.
• Rear Camera: Dual: 16 MP (f/1.7) + 20 MP (f/1.7).
• Front Camera: 16 MP (f/2.0).
• Processor: Qualcomm SDM845 Snapdragon 845.
• RAM: 6GB or 8GB LPDDR4X.
• Storage: 64GB, 128GB, or 256GB UFS 2.1.
• Operating System: OxygenOS based on Android 8.1 (Oreo), upgradable to Android 11.
• Connectivity: Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, NFC, USB Type-C.

Instructions for Replacing OnePlus 6 Screen

Follow these detailed steps to replace the screen of the OnePlus 6:

• Step 1: Power off the device and remove the SIM card tray.
• Step 2: Heat the edges of the rear glass cover using a heat gun or hairdryer to soften the adhesive.
• Step 3: Use a suction cup to create a gap between the rear cover and the phone body. Insert a plastic opening tool and carefully slide it around the edges to separate the back cover from the chassis.
• Step 4: Remove the screws securing the internal plastic cover above the battery connector.
• Step 5: Disconnect the battery connector to avoid any electrical damage.
• Step 6: Unscrew and remove the screws securing the screen digitizer and display cable connectors.
• Step 7: Carefully pry up and disconnect the display cable connectors from the motherboard.
• Step 8: Heat the front screen to soften the adhesive beneath it.
• Step 9: Use a suction cup and a plastic opening tool to gently lift and remove the damaged screen from the frame.
• Step 10: Clean any adhesive residue from the frame, ensuring it is free of debris.
• Step 11: Apply new adhesive strips to the frame and align the new screen carefully before pressing it into place.
• Step 12: Reconnect the display cable connectors and secure them with screws.
• Step 13: Reconnect the battery connector, replace the internal plastic cover, and secure it with screws.
• Step 14: Align and press the rear cover back onto the device. Apply gentle pressure along the edges to ensure proper adhesion.
• Step 15: Power on the device to test the new screen before replacing the SIM card tray.

Instructions for Replacing OnePlus 6 Battery

To replace the battery of the OnePlus 6, follow these steps:

• Step 1: Power off the device and remove the SIM card tray.
• Step 2: Heat the rear glass cover edges using a heat gun or hairdryer to soften the adhesive.
• Step 3: Use a suction cup to create a gap and insert a plastic opening tool to separate the back cover from the phone body.
• Step 4: Remove the screws securing the internal plastic cover above the battery connector.
• Step 5: Disconnect the battery connector to avoid any electrical shorts.
• Step 6: Use a plastic tab or pull the adhesive strips to safely lift the battery from the device.
• Step 7: Insert the new battery in the same orientation and reconnect the battery connector.
• Step 8: Replace the internal plastic cover and secure it with screws.
• Step 9: Align the rear cover and press it onto the phone. Apply gentle pressure to ensure proper adhesion.
• Step 10: Power on the device to ensure the new battery is functioning correctly before replacing the SIM card tray.

Instructions for Replacing OnePlus 6 Rear Camera

Follow these steps to replace the rear camera of the OnePlus 6:

• Step 1: Power off the device and remove the SIM card tray.
• Step 2: Heat the edges of the rear glass cover using a heat gun or hairdryer to soften the adhesive.
• Step 3: Use a suction cup to create a gap and insert a plastic opening tool to separate the back cover from the phone body.
• Step 4: Remove the screws securing the internal plastic cover above the connectors.
• Step 5: Disconnect the battery connector to avoid any electrical shorts.
• Step 6: Locate the rear camera connectors and carefully pry them up using a plastic opening tool.
• Step 7: Remove the screws and gently lift out the old rear camera module.
• Step 8: Place the new rear camera module in the same position and connect the camera connectors to the motherboard.
• Step 9: Secure the camera module with screws.
• Step 10: Reconnect the battery connector, replace the internal plastic cover, and secure it with screws.
• Step 11: Align the rear cover and press it onto the phone. Apply gentle pressure to ensure proper adhesion.
• Step 12: Power on the device to ensure the new rear camera is functioning correctly before replacing the SIM card tray.