Oneplus 6T spare parts

Technical Characteristics of Oneplus 6T Repuestos

The Oneplus 6T is a high-performance smartphone featuring a variety of components that can be individually replaced if damaged. Below are the main technical characteristics of its repuestos:

• Screen: 6.41 inches, Optic AMOLED, 1080 x 2340 pixels
• Battery: Non-removable Li-Po 3700 mAh battery
• Rear Camera: Dual 16 MP + 20 MP, f/1.7 aperture
• Front Camera: 16 MP, f/2.0 aperture
• Processor: Qualcomm Snapdragon 845
• RAM: 6GB/8GB
• Storage: 128GB/256GB, no external slot
• Operating System: OxygenOS based on Android 9.0 (Pie)

Instructions on How to Replace Oneplus 6T Repuestos

General Tips

Before starting any repair, make sure you have a clean and static-free workspace. Use the appropriate tools for each task to avoid damaging the phone components. Turn off the phone and remove the SIM card tray prior to disassembly.

Replacing the Screen

• Step 1: Heat the edges of the phone to soften the adhesive holding the back cover. A heat gun or a hairdryer can be used for this purpose.
• Step 2: Use a plastic prying tool to gently lift the back cover. Be cautious not to damage the fingerprint sensor cable connected to the motherboard.
• Step 3: Disconnect the fingerprint sensor cable using a spudger.
• Step 4: Remove the screws securing the battery cover and the motherboard. These screws are typically Phillips #00.
• Step 5: Disconnect the battery connector using a plastic spudger to prevent electrical damage.
• Step 6: Remove the old screen by heating the edges and using a prying tool to lift the screen gently.
• Step 7: Connect the new screen to the motherboard and secure all screws. Reconnect the fingerprint sensor cable before re-attaching the back cover.

Replacing the Battery

• Step 1: Follow the first five steps of screen replacement to access the battery compartment.
• Step 2: Carefully pull on the adhesive strips at the bottom of the battery to release it. If the adhesive is stubborn, use an isopropyl alcohol solution to soften it.
• Step 3: Insert the new battery into place and ensure that it is properly aligned.
• Step 4: Reconnect the battery connector to the motherboard and secure the battery cover with screws.
• Step 5: Replace the back cover, ensuring the adhesive is secure. Reassemble the phone by following the disassembly steps in reverse order.

Replacing the Rear Camera

• Step 1: Remove the back cover by following the first three steps of the screen replacement instructions.
• Step 2: Remove the screws securing the camera module to the motherboard.
• Step 3: Disconnect the camera module flex cable from the motherboard using a plastic spudger.
• Step 4: Replace the faulty camera module with a new one and reconnect the flex cable to the motherboard.
• Step 5: Secure the camera module with screws and replace the back cover, ensuring all connectors and components are properly positioned.

Make sure to test the phone thoroughly after any repair to ensure that all functions are working correctly. If you encounter any issues or are unsure about performing any step, consult a professional technician for assistance.