Oneplus 7 Pro spare parts

Technical Characteristics of OnePlus 7 Pro Repuestos

Screen Replacement

Type: Fluid AMOLED

Size: 6.67 inches

Resolution: 1440 x 3120 pixels

Protection: Corning Gorilla Glass 5

Battery Replacement

Type: Li-Po

Capacity: 4000 mAh

Voltage: 3.85V

Rear Camera Replacement

Main: 48 MP

Telephoto: 8 MP

Ultra-wide: 16 MP

Features: Dual-LED flash, HDR, panorama

Instructions on How to Replace OnePlus 7 Pro Repuestos

Screen Replacement Instructions

• Step 1: Power off the device.
• Step 2: Remove the SIM card tray using a SIM ejector tool.
• Step 3: Heat the edges of the back cover with a heat gun to soften the adhesive.
• Step 4: Use a suction cup and a plastic opening tool to carefully lift and remove the back cover.
• Step 5: Unscrew all visible screws around the interior frame.
• Step 6: Disconnect the battery and other connectors from the motherboard.
• Step 7: Remove the screen from the frame carefully.
• Step 8: Replace with the new screen, reattach all connectors, and screw the frame back in place.
• Step 9: Reattach the back cover and insert the SIM card tray. Power on the device to test the new screen.

Battery Replacement Instructions

• Step 1: Power off the device.
• Step 2: Remove the SIM card tray using a SIM ejector tool.
• Step 3: Heat the edges of the back cover using a heat gun to soften the adhesive.
• Step 4: Use a suction cup and a plastic opening tool to carefully lift and remove the back cover.
• Step 5: Unscrew the screws holding the battery connector shield in place.
• Step 6: Disconnect the battery connector.
• Step 7: Carefully pry out the battery using a plastic spudger.
• Step 8: Insert the new battery and reconnect the battery connector.
• Step 9: Screw the battery connector shield back in place.
• Step 10: Reattach the back cover and insert the SIM card tray. Power on the device to test the new battery.

Rear Camera Replacement Instructions

• Step 1: Power off the device.
• Step 2: Remove the SIM card tray using a SIM ejector tool.
• Step 3: Heat the edges of the back cover using a heat gun to soften the adhesive.
• Step 4: Use a suction cup and a plastic opening tool to carefully lift and remove the back cover.
• Step 5: Unscrew the screws securing the camera module on the motherboard.
• Step 6: Disconnect the camera module connectors from the motherboard.
• Step 7: Carefully remove the camera module from its housing.
• Step 8: Insert the new camera module and reconnect the connectors.
• Step 9: Secure the camera module by screwing it back onto the motherboard.
• Step 10: Reattach the back cover and insert the SIM card tray. Power on the device to test the new camera module.