Oneplus 7T repuestos

OnePlus 7T Spare Parts (Repuestos)

The OnePlus 7T is known for its high performance and sleek design; however, after extended use, certain parts may need replacement. Below are the technical characteristics of commonly replaced OnePlus 7T spare parts (repuestos) and detailed instructions on how to replace them.

Technical Characteristics of OnePlus 7T Repuestos

• Battería: 3800 mAh, non-removable Li-Po battery.
• Pantalla: 6.55-inch Fluid AMOLED display, 1080 x 2400 pixels resolution.
• Cámara Trasera: Triple camera setup: 48MP (wide), 12MP (telephoto), 16MP (ultrawide).
• Cámara Delantera: 16MP wide camera.
• Conector de Carga: USB Type-C 3.1.
• Placa Madre: Qualcomm SM8150 Snapdragon 855+ chipset, Octa-core CPU.
• Altavoz: Dual stereo speakers.
• Modulo de Lector de Huellas: Optical under-display fingerprint sensor.

Instructions for Replacing OnePlus 7T Repuestos

Follow these detailed steps to replace various OnePlus 7T components:

Battery Replacement

• Power off the phone and remove the SIM card tray.
• Remove the back cover using a plastic pry tool. Apply heat if necessary to soften the adhesive.
• Disconnect the battery connector carefully using a plastic spudger.
• Remove the adhesive holding the battery and carefully lift it out. Avoid puncturing the battery.
• Install the new battery, connect the battery connector, and reassemble the back cover.

Screen Replacement

• Power off the phone and remove the SIM card tray.
• Use a plastic pry tool to remove the back cover, applying heat to soften the adhesive if needed.
• Disconnect all ribbon cables connecting the screen to the motherboard.
• Unscrew the necessary screws and gently remove the damaged screen.
• Install the new screen by connecting the ribbon cables and securing the screws.
• Reattach the back cover and power on the device to test the new screen.

Rear Camera Replacement

• Power off the phone and remove the SIM card tray.
• Detach the back cover using a plastic pry tool, applying heat if necessary.
• Locate the rear camera module and disconnect its ribbon cable from the motherboard.
• Unscrew the camera module and gently lift it out.
• Replace with the new camera module, reconnect the ribbon cable, and secure with screws.
• Reassemble the back cover and test the new camera by powering on the device and opening the camera app.

Charging Port Replacement

• Power off the phone and remove the SIM card tray.
• Use a plastic pry tool to remove the back cover, applying heat to soften the adhesive if needed.
• Locate the charging port and disconnect its ribbon cable from the motherboard.
• Unscrew the necessary screws and carefully remove the old charging port.
• Install the new charging port, reconnect its ribbon cable, and secure the screws.
• Reattach the back cover and test the new charging port by powering on the device and connecting a charger.

By following these detailed instructions, you can successfully replace various components (repuestos) of the OnePlus 7T and extend the lifespan of your device. Always handle the components with care and consider seeking professional help if you are not confident in performing repairs yourself.