Oneplus 8T spare parts

Technical Characteristics of OnePlus 8T Replacement Parts (Repuestos)

The OnePlus 8T is a high-performing smartphone distinguished by its superior features and specifications. Replacement parts (repuestos) for the device are engineered to match its original components in quality and performance. Here's a detailed look at the key technical characteristics of some essential OnePlus 8T repuestos:

1. OnePlus 8T Display Assembly

• Type: Fluid AMOLED, 120Hz
• Size: 6.55 inches
• Resolution: 1080 x 2400 pixels
• Protection: Corning Gorilla Glass

2. OnePlus 8T Battery

• Type: Non-removable Li-Po
• Capacity: 4500 mAh
• Charging: Fast charging 65W, 100% in 39 min (advertised)

3. OnePlus 8T Rear Camera Module

• Main Sensor: 48 MP, f/1.7
• Ultra-wide Sensor: 16 MP, f/2.2, 123˚
• Macro Sensor: 5 MP, f/2.4
• Monochrome Sensor: 2 MP, f/2.4

4. OnePlus 8T Charging Port

• Type: USB Type-C 3.1

Instructions on How to Replace OnePlus 8T Replacement Parts

1. Replacing the OnePlus 8T Display Assembly

• Step 1: Power off the device and remove the SIM card tray.
• Step 2: Use a heat gun or hairdryer to soften the adhesive around the edges of the back cover.
• Step 3: Carefully insert a plastic pry tool into the seam between the back cover and the frame. Gently run the tool around the edges to lift the back cover.
• Step 4: Disconnect the battery and remove any screws securing the motherboard cover. Remove the cover.
• Step 5: Disconnect the display connector from the motherboard.
• Step 6: Apply heat to the front screen to loosen the adhesive. Carefully use a suction cup and pry tool to lift the display assembly.
• Step 7: Replace with the new display assembly, connect it to the motherboard, and secure all screws and connectors.
• Step 8: Reapply adhesive to the back cover, reattach it, and reinsert the SIM card tray.

2. Replacing the OnePlus 8T Battery

• Step 1: Follow steps 1-4 from the display replacement instructions to access the battery compartment.
• Step 2: Disconnect the battery connector and carefully pry out the old battery using a plastic tool.
• Step 3: Place the new battery into the compartment, ensuring it is properly aligned.
• Step 4: Reconnect the battery connector and secure all components as per the original setup.
• Step 5: Reattach the back cover and power on the device to ensure proper functionality.

3. Replacing the OnePlus 8T Rear Camera Module

• Step 1: Follow steps 1-4 from the display replacement instructions to access the internal components.
• Step 2: Locate the rear camera module on the motherboard and disconnect its connectors.
• Step 3: Carefully remove the old camera module and place the new module in the same position.
• Step 4: Reconnect the camera module connectors and ensure they are firmly in place.
• Step 5: Reassemble the device by securing all screws and replacing the back cover.

4. Replacing the OnePlus 8T Charging Port

• Step 1: Follow steps 1-4 from the display replacement instructions to access the charging port area.
• Step 2: Locate the charging port module and disconnect its ribbon cable from the motherboard.
• Step 3: Remove any screws securing the charging port module and gently pry it out.
• Step 4: Install the new charging port module in place and reconnect its ribbon cable.
• Step 5: Secure all screws and reassemble the device by replacing the back cover.

Proceed with caution when handling internal components and consider seeking professional assistance if unsure about the repair process. Proper tools and a steady hand are essential for a successful repair.