Oneplus 9 Pro spare parts

Technical Characteristics of OnePlus 9 Pro Repuestos

The OnePlus 9 Pro is a high-end smartphone known for its premium build and cutting-edge features. Below are the key technical characteristics of the main replacement parts (repuestos) for the OnePlus 9 Pro:

Display

• Type: Fluid AMOLED, 1B colors, 120Hz, HDR10+
• Size: 6.7 inches, 112.6 cm² (~90.3% screen-to-body ratio)
• Resolution: 1440 x 3216 pixels, 20:9 ratio (~525 ppi density)
• Protection: Corning Gorilla Glass

Battery

• Type: Li-Po 4500 mAh, non-removable
• Charging: Fast charging 65W, 1-100% in 29 min (advertised)

Camera

• Main Sensor: 48 MP, f/1.8, 23mm (wide), 1/1.43"", 1.12µm, multi-directional PDAF, Laser AF, OIS
• Ultra Wide Sensor: 50 MP, f/2.2, 14mm, 1/1.56"", 1.0µm
• Telephoto Sensor: 8 MP, f/2.4, 77mm (telephoto), PDAF, OIS, 3.3x optical zoom
• Monochrome Sensor: 2 MP, f/2.4

Motherboard

• Chipset: Qualcomm SM8350 Snapdragon 888 5G (5 nm)
• CPU: Octa-core (1x2.84 GHz Cortex-X1 & 3x2.42 GHz Cortex-A78 & 4x1.80 GHz Cortex-A55)
• GPU: Adreno 660

Instructions for Replacing OnePlus 9 Pro Repuestos

Replacing components in the OnePlus 9 Pro is a delicate process that requires special tools and careful handling. Below are step-by-step instructions for replacing the display, battery, and motherboard.

How to Replace the Display

• Step 1: Power off the phone and remove the SIM tray.
• Step 2: Use a heat gun to soften the adhesive around the edges of the back cover.
• Step 3: Carefully insert a plastic prying tool between the back cover and frame, then slide it around to detach the cover.
• Step 4: Unscrew the screws securing the mid-frame and remove it.
• Step 5: Disconnect the battery connector to avoid short circuits.
• Step 6: Disconnect the display connector from the motherboard.
• Step 7: Gently apply heat to the front screen to weaken the adhesive.
• Step 8: Use a suction cup and prying tool to lift and remove the old display.
• Step 9: Apply new adhesive or use pre-cut adhesive strips on the frame.
• Step 10: Place the new display into the frame and align it properly.
• Step 11: Reconnect the display connector to the motherboard.
• Step 12: Reattach the mid-frame by securing it with screws.
• Step 13: Reconnect the battery connector.
• Step 14: Reassemble the back cover by pressing it firmly into place.
• Step 15: Power on the device and test the new display for proper functionality.

How to Replace the Battery

• Step 1: Follow steps 1 to 5 from the display replacement instructions to access the battery.
• Step 2: Carefully pull the battery adhesive tabs to remove the old battery.
• Step 3: Insert the new battery and align it properly in the battery compartment.
• Step 4: Reconnect the battery connector to the motherboard.
• Step 5: Secure the mid-frame with screws.
• Step 6: Reattach the back cover by pressing it firmly into place.
• Step 7: Power on the device and ensure the new battery is functioning correctly.

How to Replace the Motherboard

• Step 1: Follow steps 1 to 5 from the display replacement instructions to access the internal components.
• Step 2: Disconnect all flex cables connected to the motherboard, including those for the display, battery, cameras, and buttons.
• Step 3: Unscrew the screws that secure the motherboard to the frame.
• Step 4: Gently lift and remove the old motherboard from the frame.
• Step 5: Place the new motherboard into the frame, aligning it correctly with the screw holes and connectors.
• Step 6: Secure the new motherboard with the screws.
• Step 7: Reconnect all flex cables to the new motherboard.
• Step 8: Reattach the mid-frame by securing it with screws.
• Step 9: Reconnect the battery and reassemble the back cover.
• Step 10: Power on the device and test all functionalities, including the display, cameras, and buttons, to ensure the new motherboard is working properly.

Note: Always handle internal components with care and use appropriate tools to avoid damaging sensitive parts. If you're not confident in performing these repairs, seek professional assistance.