Oneplus 9R spare parts

Technical Characteristics of OnePlus 9R Repuestos

Battery

• Type: Lithium-ion
• Capacity: 4500mAh
• Voltage: 3.87V

Display

• Size: 6.55 inches
• Resolution: 2400 x 1080 pixels
• Type: Fluid AMOLED

Camera

• Main Camera: 48MP
• Ultra-Wide Camera: 16MP
• Macro Camera: 5MP
• Monochrome Camera: 2MP

Other Components

• Processor: Qualcomm Snapdragon 870
• RAM: 8GB / 12GB
• Storage: 128GB / 256GB

Instructions on How to Replace OnePlus 9R Repuestos

Tools Needed

• Small Phillips screwdriver
• Plastic opening tool
• Suction cup
• SIM ejector tool
• Tweezers
• Adhesive strips
• Heat gun or hairdryer

Step-by-Step Guide

Step 1: Power off the Device

Make sure to turn off your OnePlus 9R completely before starting the repair process.

Step 2: Remove the SIM Card Tray

Use the SIM ejector tool to remove the SIM card tray from the device.

Step 3: Heat the Back Cover

Use a heat gun or hairdryer to apply heat around the edges of the back cover to soften the adhesive.

Step 4: Remove the Back Cover

Place a suction cup on the back cover and use a plastic opening tool to carefully pry it open. Begin at one corner and gently work your way around until the cover is fully detached.

Step 5: Disconnect the Battery

Using the Phillips screwdriver, remove the screws securing the battery connector shield. Once removed, use tweezers to disconnect the battery from the motherboard.

Step 6: Remove Components

• For Battery Replacement: Carefully lift the battery using a plastic tool. Be cautious of any adhesive strips holding the battery in place.
• For Display Replacement: Disconnect the display connectors from the motherboard. Use the heat gun or hairdryer to apply gentle heat to the edges of the screen and then use a plastic tool to carefully pry and remove the display.

Step 7: Install New Components

Place the new component (battery, display, etc.) in the correct position. Reconnect all necessary connectors and secure them with screws as previously removed.

Step 8: Reassemble the Device

• Reconnect the battery to the motherboard and secure the battery connector shield with screws.
• Align the back cover and press it firmly around the edges to ensure it adheres properly.

Step 9: Power On the Device

Insert the SIM card tray back into the device and power it on to ensure everything is functioning correctly.

Following these instructions carefully should help you successfully replace the components of your OnePlus 9R device.