OnePlus Ace 2 Spare Parts

Technical Characteristics of OnePlus Ace 2 Repuestos

The OnePlus Ace 2 Repuestos includes various critical components and specifications that match the performance and design of the original device. Here are the technical characteristics:

• Display: 6.7 inches, Full HD+ AMOLED, 120Hz refresh rate
• Processor: Qualcomm Snapdragon 888
• RAM: 8GB / 12GB
• Storage: 128GB / 256GB
• Battery: 4500mAh with Warp Charge 65W
• Rear Camera: Triple setup: 50MP (main) + 16MP (ultra wide) + 2MP (macro)
• Front Camera: 16MP
• Operating System: OxygenOS based on Android 12
• Connectivity: 5G, Wi-Fi 6, Bluetooth 5.2, USB Type-C
• Build: Gorilla Glass front and back, aluminum frame

Instructions on How to Replace OnePlus Ace 2 Repuestos

Tools and Materials Needed:

• Replacement OnePlus Ace 2 component (e.g., display, battery)
• Precision screwdrivers (Phillips #00 and #000)
• Plastic prying tools
• Tweezers
• Suction cup tool
• Anti-static wrist strap
• Adhesive strips (for reassembly)
• Heat gun or hairdryer

Preparation:

• Power off the device completely.
• Remove the SIM card tray using the SIM ejector tool.
• Wear an anti-static wrist strap to avoid damaging internal components.

Step-by-Step Replacement Process:

1. Remove the Back Cover:

• Use the heat gun or hairdryer to gently warm the edges of the back cover. This will soften the adhesive.
• Insert the suction cup tool to create a gap between the back cover and the frame.
• Use plastic prying tools to carefully lift and remove the back cover. Be mindful not to damage the adhesive strip or the back cover itself.

2. Disconnect Battery Connector:

• Locate and unscrew the midframe screws using the appropriate precision screwdriver.
• Remove the midframe that covers the battery and internal components.
• Use plastic tweezers or a spudger to disconnect the battery connector from the motherboard.

3. Replace Component (e.g., Display):

• Unscrew and carefully remove the screws securing the broken component (e.g., broken display).
• Disconnect any flex cables attached to the component being replaced.
• Remove the faulty component gently. For displays, ensure to remove the adhesive completely.
• Place the new replacement component in its location and connect any flex cables.
• Screw the new component onto the frame if required.

4. Reconnect Battery and Reassemble:

• Reconnect the battery connector to the motherboard.
• Place the midframe back over the battery and internal components and secure with screws.

5. Reattach Back Cover:

• If the adhesive strip is no longer sticky, apply new adhesive strips around the edges of the back cover.
• Align the back cover with the phone’s frame and press firmly along the edges to secure the adhesive bond.

6. Final Steps:

• Reinsert the SIM card tray.
• Power on the device and check that all replaced components are functioning correctly.

By following these detailed steps, you can effectively replace components in your OnePlus Ace 2. Always proceed with caution to avoid damage to your device.