Oneplus Ace 3 spare parts

OnePlus Ace 3 Spare Parts Technical Characteristics

Below are the details of the technical characteristics of various OnePlus Ace 3 spare parts:

Screen Replacement

• Type: AMOLED capacitive touchscreen, 1B colors
• Size: 6.7 inches
• Resolution: 1080 x 2412 pixels
• Protection: Corning Gorilla Glass

Battery Replacement

• Type: Li-Po 5000 mAh, non-removable
• Charging: Fast charging 65W, 50% in 15 min

Camera Module

• Main Camera: Triple 50 MP, 16 MP, 2 MP
• Features: LED flash, HDR, panorama
• Video: 4K@30fps, 1080p@30/60fps

Motherboard

• Chipset: Qualcomm SM8350 Snapdragon 8 Gen 1
• CPU: Octa-core (1x3.00 GHz Cortex-X2 & 3x2.50 GHz Cortex-A710 & 4x1.80 GHz Cortex-A510)
• GPU: Adreno 730

Instructions for Replacing OnePlus Ace 3 Spare Parts

Screen Replacement Instructions

1. Power off your OnePlus Ace 3.
2. Use a SIM ejector tool to remove the SIM tray.
3. Gently heat the edges of the phone with a heat gun to loosen the adhesive.
4. Carefully insert a plastic opening tool between the screen and the rear cover.
5. Slide the tool around the edges to separate the screen from the phone body.
6. Disconnect the screen's flex cables from the motherboard by lifting the connectors.
7. Remove the damaged screen and replace it with a new one, reconnecting the flex cables.
8. Reassemble the phone by reattaching the rear cover and SIM tray.
9. Power on the device to ensure the new screen is functioning correctly.

Battery Replacement Instructions

1. Power off your OnePlus Ace 3.
2. Remove the SIM tray using a SIM ejector tool.
3. Heat the edges of the back cover with a heat gun to soften the adhesive.
4. Insert a plastic opening tool to gently pry away the back cover.
5. Unscrew and remove the battery connector shield.
6. Disconnect the old battery by carefully unplugging the connector.
7. Use a pull tab or a plastic tool to remove the old battery from the adhesive.
8. Align and place the new battery in position.
9. Reconnect the battery connector and replace the shield.
10. Reassemble the phone with the back cover and SIM tray.
11. Power on the device to verify the new battery is working properly.

Camera Module Replacement Instructions

1. Power off your OnePlus Ace 3.
2. Take out the SIM tray using the SIM ejector tool.
3. Heat the phone's edges with a heat gun to weaken the adhesive holding the rear cover.
4. Carefully use a plastic opening tool to pry off the rear cover.
5. Locate and unscrew the screws securing the camera module and disconnect the flex cables.
6. Remove the malfunctioning camera module.
7. Install the new camera module by reconnecting the flex cables and securing it with screws.
8. Reattach the rear cover and the SIM tray.
9. Power on the device to ensure that the new camera module is operational.

Motherboard Replacement Instructions

1. Turn off the OnePlus Ace 3 completely.
2. Use a SIM ejector tool to remove the SIM tray.
3. Heat around the phone edges with a heat gun to loosen the back cover adhesive.
4. Gently pry open the back cover using a plastic opening tool.
5. Disconnect and remove the battery following the battery replacement instructions.
6. Disconnect all flex cables connected to the motherboard, such as the screen, camera, and other components.
7. Unscrew and carefully lift the motherboard out of the phone.
8. Place the new motherboard in the vacant spot, reconnecting all flex cables and securing with screws.
9. Reinstall the battery and replace the back cover along with the SIM tray.
10. Power on the device and check if it boots up properly and all functions are working.