Oneplus Nord 2T 5G CPH2399 spare parts

Technical Characteristics of OnePlus Nord 2T 5G CPH2399 Repuestos

The OnePlus Nord 2T 5G CPH2399 is a mid-range smartphone equipped with a variety of advanced features. Below are the key technical characteristics:

Display

• Size: 6.43 inches
• Type: Fluid AMOLED
• Resolution: 1080 x 2400 pixels
• Protection: Corning Gorilla Glass 5

Hardware

• Chipset: MediaTek Dimensity 1200-AI
• CPU: Octa-core (1x3.0 GHz Cortex-A78 & 3x2.6 GHz Cortex-A78 & 4x2.0 GHz Cortex-A55)
• GPU: Mali-G77 MC9
• RAM: 8GB/12GB
• Internal Storage: 128GB/256GB

Camera

• Triple Main Camera: 50 MP (wide), 8 MP (ultrawide), 2 MP (monochrome)
• Front Camera: 32 MP (wide)

Battery

• Type: Li-Po 4500 mAh
• Charging: 80W SuperVOOC

Instructions for Replacing OnePlus Nord 2T 5G CPH2399 Repuestos

Follow these steps to replace components of the OnePlus Nord 2T 5G CPH2399. Make sure to have the necessary tools such as a plastic pry tool, suction cup, screwdriver set, and spudger.

Step 1: Power Off the Device

Before beginning any repair, ensure that the phone is powered off to prevent any potential damage or electrical hazards.

Step 2: Remove the SIM Tray

Eject the SIM tray using a SIM card ejection tool.

Step 3: Heat the Back Cover

Use a heat gun or hairdryer to carefully heat the edges of the back cover. This will soften the adhesive holding it in place.

Step 4: Remove the Back Cover

Use a suction cup to lift the back cover gently. Insert a plastic pry tool between the back cover and the phone frame. Carefully slide the tool around the edges to separate the cover from the adhesive.

Step 5: Disconnect the Battery

Locate the battery connector and use a spudger to gently disconnect it from the motherboard.

Step 6: Remove the Screws

Using a suitable screwdriver, remove the screws securing the various components you wish to replace, such as the battery, camera modules, or charging port.

Step 7: Replace the Faulty Components

Carefully remove the faulty component and replace it with a new one. Ensure the new component is properly aligned and secured with screws.

Step 8: Reassemble the Device

Reconnect the battery connector and re-seat the back cover. Apply gentle pressure around the edges to secure it back in place. Insert the SIM tray back into its slot.

Step 9: Power On the Device

Power on the device to ensure that it is functioning correctly and that the new component is working as expected.

Congratulations! You have successfully replaced the components of your OnePlus Nord 2T 5G CPH2399.