Oneplus Nord 3 5G Spare Parts

Technical Characteristics of Oneplus Nord 3 5G Repuestos

The Oneplus Nord 3 5G Repuestos (replacement parts) include various components that ensure the device operates efficiently. Below are the key technical characteristics:

Screen

• Type: AMOLED, 90Hz, HDR10+
• Size: 6.44 inches
• Resolution: 1080 x 2400 pixels
• Protection: Corning Gorilla Glass 5

Battery

• Type: Li-Po 4500 mAh, non-removable
• Charging: Fast charging 30W, 70% in 30 min (advertised)

Camera

• Main Camera: Quad 48 MP (wide), 8 MP (ultrawide), 5 MP (macro), 2 MP (depth)
• Features: Dual-LED flash, HDR, panorama
• Video: 4K@30/60fps, 1080p@30/60/240fps, gyro-EIS

Performance

• Chipset: Qualcomm SM7250-AC Snapdragon 765G 5G (7 nm)
• CPU: Octa-core (1x2.4 GHz Kryo 475 Prime & 1x2.2 GHz Kryo 475 Gold & 6x1.8 GHz Kryo 475 Silver)
• GPU: Adreno 620
• RAM: 6GB/8GB/12GB
• Internal Storage: 64GB/128GB/256GB

Instructions to Replace Oneplus Nord 3 5G Repuestos

Follow these detailed instructions to safely and efficiently replace the components of Oneplus Nord 3 5G:

Replacing the Screen

• Turn off the device and remove the SIM card tray.
• Use a heat gun to soften the adhesive around the edges of the screen.
• Carefully use a suction cup and pry tool to lift and separate the screen from the frame.
• Disconnect the ribbon cables that connect the screen to the motherboard.
• Attach the new screen by connecting the ribbon cables to the motherboard.
• Apply adhesive to the edges of the new screen and press it firmly onto the frame.
• Reinsert the SIM card tray and power on the device to test the new screen.

Replacing the Battery

• Turn off the device and remove the SIM card tray.
• Remove the back cover by applying heat and using a pry tool to separate it from the frame.
• Disconnect the battery connector from the motherboard.
• Carefully pry out the old battery from its compartment.
• Place the new battery into the compartment and reconnect the battery connector to the motherboard.
• Reapply the back cover with adhesive and press it firmly to ensure it is secured.
• Reinsert the SIM card tray and power on the device to test the new battery.

Replacing the Main Camera Module

• Turn off the device and remove the SIM card tray.
• Remove the back cover by applying heat and using a pry tool to separate it from the frame.
• Locate the camera module and disconnect its flex cables from the motherboard.
• Unscrew and remove the camera module from its housing.
• Install the new camera module in the same housing and screw it in place.
• Reconnect the camera module's flex cables to the motherboard.
• Reapply the back cover with adhesive and press it firmly to ensure it is secured.
• Reinsert the SIM card tray and power on the device to test the new camera module.