Oneplus Nord CE 2 Lite 5G spare parts

OnePlus Nord CE 2 Lite 5G Technical Characteristics

The OnePlus Nord CE 2 Lite 5G comes with a range of specifications and technical features that make it a competitive mid-range smartphone option. Below are its key technical characteristics:

• Processor: Qualcomm Snapdragon 695 5G
• RAM: 6GB / 8GB
• Storage: 128GB (expandable via microSD)
• Display: 6.59 inches, 1080 x 2412 pixels
• Battery: 5000mAh with 33W fast charging
• Operating System: OxygenOS based on Android 11
• Camera: Triple setup (64 MP Main, 2 MP Macro, 2 MP Depth)
• Front Camera: 16 MP
• Connectivity: 5G, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.2
• Fingerprint Sensor: Side-mounted
• Ports: USB Type-C, 3.5mm headphone jack

Instructions for Replacing OnePlus Nord CE 2 Lite 5G Parts

Replacing parts of the OnePlus Nord CE 2 Lite 5G requires some technical skill and the right tools. Here are detailed instructions to help you replace some common parts:

Tools Required:

• Plastic Pry Tools
• Small Phillips and Flathead Screwdrivers
• Suction Cup
• SIM Card Ejector Tool
• Adhesive Strips or Adhesive Tape
• Antistatic Wrist Strap (recommended)

Step-by-Step Instructions for Replacing the Battery:

1. Power off your OnePlus Nord CE 2 Lite 5G.

2. Remove the SIM card tray using the SIM card ejector tool.

3. Use a plastic pry tool to gently separate the back cover from the phone. Start from the edge and slowly work your way around to avoid damaging the clips.

4. Once the back cover is removed, locate the battery. You will need to disconnect the battery connector first. Use a small Phillips screwdriver to remove any screws securing the battery connector shield, then disconnect the battery connector.

5. Use the pull tab (if available) to lift and remove the battery. If there is no pull tab or it is difficult to remove, gently use a plastic pry tool to lift the battery. Avoid using metal tools as they can puncture the battery.

6. Before installing the new battery, remove any remaining adhesive from the battery compartment. You can use adhesive strips or adhesive tape to secure the new battery in place.

7. Connect the new battery to the battery connector and replace the connector shield if it was present.

8. Reattach the back cover and press gently around the edges to ensure it is securely fastened.

9. Insert the SIM card tray back into the phone.

10. Power on the device and check if the new battery is functioning properly.

Step-by-Step Instructions for Replacing the Display:

1. Power off your OnePlus Nord CE 2 Lite 5G.

2. Remove the SIM card tray using the SIM card ejector tool.

3. Use a plastic pry tool to gently separate the back cover from the phone. Start from the edge and slowly work your way around to avoid damaging the clips.

4. Using a Phillips screwdriver, remove all screws securing the mid-frame. Carefully detach the mid-frame to expose the internal components.

5. Disconnect the battery connector before proceeding to disconnect the display connector.

6. Use a suction cup to lift the display. Place the suction cup on the display and gently pull up while using a plastic pry tool to separate the display from the frame. Be cautious around the edges to avoid damaging the display or the frame.

7. Once the display is removed, clean the frame to remove any adhesive residue.

8. Apply adhesive strips or adhesive tape around the frame to secure the new display.

9. Connect the new display to the display connector. Make sure it is properly aligned and seated.

10. Reconnect the battery connector and reattach the mid-frame by reversing the steps you took to remove it.

11. Carefully press the new display into place, ensuring that it is securely attached to the frame.

12. Reattach the back cover, pressing gently around the edges to ensure it is securely fastened.

13. Insert the SIM card tray back into the phone.

14. Power on the device and make sure the new display is functioning properly.