Oneplus Nord CE 3 Lite 5G spare parts

Technical Characteristics of OnePlus Nord CE 3 Lite 5G Repuestos

The OnePlus Nord CE 3 Lite 5G is designed with budget-friendly components without compromising on performance. Below are the technical characteristics of its spare parts (repuestos):

• Display: 6.72-inch, FHD+, 120Hz, IPS LCD
• Battery: 5000mAh, non-removable
• Processor: Qualcomm Snapdragon 695 5G
• Camera: Triple rear 108MP + 2MP macro + 2MP depth, 16MP front
• Storage: 128GB internal, expandable via microSD
• RAM: 8GB
• Operating System: OxygenOS based on Android 12

Instructions on How to Replace OnePlus Nord CE 3 Lite 5G Repuestos

Tools Required

• Small Phillips screwdriver
• Plastic prying tools
• Suction cup
• Tweezers
• Spudger
• Adhesive strips

Step-by-Step Replacement Instructions

1. Power Off the Device

Ensure the device is completely powered off before starting the replacement process.

2. Remove the SIM Card Tray

Using the SIM ejector tool, remove the SIM card tray from the device.

3. Open the Back Cover

Use a suction cup to lift the back cover slightly, then insert a plastic prying tool to carefully release the clips around the edges. Gently separate the back cover from the rest of the phone.

4. Disconnect the Battery

Using the Phillips screwdriver, remove the screws holding the battery connector shield. Carefully lift the shield and disconnect the battery connector using a spudger.

5. Remove the Battery

Gently pry up on the battery with a plastic tool. Take care not to bend or puncture the battery. Use adhesive strips to aid in lifting the battery out of its compartment if necessary.

6. Replace the Battery

Align the new battery in the compartment, and press it gently into place. Reconnect the battery connector, and secure it with the previously removed shield and screws.

7. Remove and Replace Other Components

If replacing other parts such as the display, camera, or internals, follow these additional steps:

• For Display Replacement: Unscrew and disconnect cables associated with the display, then reassemble with the new display.
• For Camera Replacement: Unscrew the camera module(s) and replace them with new ones, ensuring all connectors are properly attached.
• For Internal Components: Carefully follow the device's layout to remove respective screws and connectors. Replace the faulty components with the new repuestos.

8. Reassemble the Device

After replacing the needed parts, reassemble your device by following the disassembly steps in reverse order. Make sure all screws are tightened and components are securely connected.

9. Test the Device

Power on the device to ensure everything is functioning correctly. Check the replaced components for proper operation.