Oneplus Nord N20 SE spare parts

Technical Characteristics of OnePlus Nord N20 SE Repuestos

The OnePlus Nord N20 SE is equipped with various replaceable parts (repuestos) that ensure its efficiency and longevity. Here are the key technical characteristics of some of the most important repuestos:

• Battery: 5000mAh, Li-Po, non-removable
• Display: 6.52 inches, IPS LCD, 720 x 1600 pixels
• Camera: 50 MP (Wide) + 2 MP (Depth) Rear Cameras, 8 MP (Front)
• Processor: MediaTek Helio G35 (12 nm)
• RAM: 4GB
• Storage: 64GB/128GB
• Charging Port: USB Type-C 2.0
• SIM Slot: Dual SIM (Nano-SIM, dual stand-by)

Instructions for Replacing OnePlus Nord N20 SE Repuestos

Replacing the Battery

Before you start, make sure the device is powered off.

• Step 1: Remove the SIM card tray using a SIM ejector tool.
• Step 2: Use a plastic prying tool to gently separate the back cover from the device.
• Step 3: Unscrew the screws securing the battery connector shield.
• Step 4: Carefully disconnect the battery connector from the motherboard.
• Step 5: Use a plastic prying tool to lift the battery out of its compartment.
• Step 6: Place the new battery in the compartment and reconnect the battery connector.
• Step 7: Screw back the battery connector shield.
• Step 8: Snap the back cover back into place and reinsert the SIM card tray.

Replacing the Screen

Ensure the device is turned off before beginning the screen replacement process.

• Step 1: Remove the SIM card tray with a SIM ejector tool.
• Step 2: Gently heat the edges of the screen to soften the adhesive using a heat gun or hairdryer.
• Step 3: Use a suction cup and a plastic prying tool to lift the screen from the frame of the device.
• Step 4: Unscrew and remove the screws securing the display connector shield.
• Step 5: Disconnect the display connector from the motherboard.
• Step 6: Remove the old screen and place the new screen in position.
• Step 7: Reconnect the display connector to the motherboard.
• Step 8: Screw back the display connector shield.
• Step 9: Press the new screen firmly onto the frame to ensure the adhesive bonds correctly.
• Step 10: Reinsert the SIM card tray.

Replacing the Charging Port

Turn off the device before starting the charging port replacement.

• Step 1: Remove the SIM card tray using a SIM ejector tool.
• Step 2: Use a plastic prying tool to carefully detach the back cover.
• Step 3: Unscrew and remove the screws securing the charging port connector shield.
• Step 4: Disconnect the charging port connector from the motherboard.
• Step 5: Remove the old charging port and replace it with the new one.
• Step 6: Reconnect the charging port connector to the motherboard.
• Step 7: Screw back the charging port connector shield.
• Step 8: Snap the back cover back into place and reinsert the SIM card tray.