Oneplus Nord N30 5G CPH2515 CPH2513 spare parts

Technical Characteristics of Oneplus Nord N30 5G CPH2515/CPH2513 Repuestos

The Oneplus Nord N30 5G (model numbers CPH2515 and CPH2513) is a feature-packed mid-range smartphone, known for its efficient performance and sleek design. When it comes to replacing parts (repuestos) for this model, it's important to be familiar with its technical characteristics to ensure compatibility and functionality. Below are the main technical characteristics:

Main Specifications

• Processor: Qualcomm Snapdragon 695 5G
• Display: 6.72-inch FHD+ (2400 x 1080 pixels) IPS LCD, 120Hz refresh rate
• RAM: 6GB or 8GB LPDDR4X
• Internal Storage: 128GB, expandable via microSD up to 1TB
• Rear Camera: Triple camera setup - 108MP main, 2MP depth, 2MP macro
• Front Camera: 16MP
• Battery: 5000mAh, with 33W fast charging support
• Operating System: OxygenOS based on Android 13
• Connectivity: 5G, 4G LTE, Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.2, USB Type-C
• Sensors: Fingerprint (side-mounted), accelerometer, gyro, proximity, compass

Instructions on How to Replace Oneplus Nord N30 5G CPH2515/CPH2513 Repuestos

Before you begin any repair on your Oneplus Nord N30 5G, make sure you have all the necessary tools and replacement parts at hand. A clean, organized workspace is also essential to avoid losing screws or damaging components.

Tools Needed:

• Precision screwdriver set
• Plastic prying tools
• Suction cup tool
• Spudger
• Antistatic wrist strap (optional but recommended)
• Replacement parts for Oneplus Nord N30 5G (e.g., screen, battery)

Step-by-Step Instructions:

• Step 1: Power off the device and remove the SIM card tray.
• Step 2: Use a precision screwdriver to remove the screws on the bottom of the phone.
• Step 3: Use a suction cup to gently lift and create a small gap between the screen and the frame. Insert a plastic prying tool into the gap and carefully disassemble the screen assembly from the back cover. Be mindful not to damage the flex cables connecting the screen to the motherboard.
• Step 4: Disconnect the battery connector to avoid any short circuits. Proceed to disconnect any other visible connectors, including the screen and charging port flex cables.
• Step 5: Remove the screws securing the motherboard and any other internal components that need to be replaced. Use a spudger to gently lift and remove these components.
• Step 6: Replace the faulty component with the new repuesto, ensuring all connectors are properly aligned and secured.
• Step 7: Reassemble the device by reversing the disassembly steps. Start by securing the motherboard and reconnecting all flex cables.
• Step 8: Carefully reattach the screen assembly to the frame, ensuring no cables are pinched or misaligned.
• Step 9: Replace the screws on the bottom of the phone and reinsert the SIM card tray.
• Step 10: Power on the device and test the new components to ensure they are functioning correctly.

Please note that performing repairs on your own may void the warranty of your device. If you are not confident in your repair skills, it is advisable to seek professional assistance.