Oneplus One X spare parts

Technical Characteristics of OnePlus One X Repuestos

The OnePlus One X is a powerful smartphone with a range of replaceable parts known as repuestos. These components include but are not limited to the screen, battery, motherboard, and camera. Below are the technical specifications of the key repuestos for the OnePlus One X.

Screen

• Type: AMOLED
• Size: 6.55 inches
• Resolution: 1080 x 2400 pixels
• Protection: Corning Gorilla Glass

Battery

• Type: Li-Po
• Capacity: 4500 mAh
• Charging: Fast charging 65W

Motherboard

• Chipset: Qualcomm Snapdragon 888
• Memory: 8GB RAM
• Storage: 128GB

Camera

• Main Camera: 48 MP, OIS, PDAF
• Front Camera: 16 MP

Instructions for Replacing OnePlus One X Repuestos

Screen Replacement

To replace the screen of the OnePlus One X, follow these steps:

• Power off the device and remove the SIM card tray.
• Use a heat gun or hairdryer to warm up the edges of the screen for about 2-3 minutes to soften the adhesive.
• Carefully use a plastic opening tool to pry open the screen from the chassis.
• Disconnect the display cable connected to the motherboard.
• Connect the new screen's display cable to the motherboard.
• Align the new screen on the chassis and press it gently to secure it in place.
• Power on the device to test the new screen functionality.
• Reinsert the SIM card tray once functionality is confirmed.

Battery Replacement

To replace the battery of the OnePlus One X, follow these steps:

• Power off the device and remove the SIM card tray.
• Unscrew the back cover and use a plastic opening tool to detach it from the phone.
• Locate the battery and disconnect its connector from the motherboard.
• Lift and carefully remove the old battery using a plastic pull tab.
• Insert the new battery and connect it to the motherboard.
• Reattach the back cover and screw it back in place.
• Power on the device and check if the new battery is working properly.
• Reinsert the SIM card tray.

Motherboard Replacement

To replace the motherboard of the OnePlus One X, follow these steps:

• Power off the device and remove the SIM card tray.
• Unscrew and remove the back cover.
• Disconnect all cables connected to the motherboard, including the battery, screen, and cameras.
• Gently remove the screws securing the motherboard to the chassis.
• Carefully lift and remove the old motherboard from the phone.
• Place the new motherboard and secure it with screws.
• Reconnect all the cables to the new motherboard.
• Reattach and screw back the back cover.
• Power on the device to ensure the new motherboard is working correctly.
• Reinsert the SIM card tray.

Camera Replacement

To replace the camera of the OnePlus One X, follow these steps:

• Power off the device and remove the SIM card tray.
• Unscrew and remove the back cover.
• Locate the camera module and disconnect its ribbon cable from the motherboard.
• Remove the screws securing the camera module and carefully lift it out.
• Position the new camera module in place and secure it with screws.
• Reconnect the ribbon cable to the motherboard.
• Reattach and screw back the back cover.
• Power on the device and test the new camera module.
• Reinsert the SIM card tray.